1 / 2
3DUpfitters Enclosure Rear MMU holes cover
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If your not using the MMU, there is no need for the holes in the back. This is a simple magnetic cover.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 137
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
If your not using the MMU with the 3Dupfitters MK3S+ enclosure, there is no need for the rear holes. This is a simple magnetic cover for the slot. It requires printing 2 pieces (included in the gcode). You need to glue in a 8mm x 3mm magnet to each.