Spectroscope case - FLEX print
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
TPU carry case for Spectroscope by PATON HAWKSLEY
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
I made a TPU case for my spectroscope purchased from https://www.patonhawksley.com/product-page/benchtop-spectroscope.
I used Fiberlogy FiberFlex 40D and initially, when I was screwing on the cap, it made squeaky noise, so I lubricated threads with hand cream, screw it once, unscrew and wiped it off. Fixed the issue immediately.
PETG might work as well as a material, but I wanted to have a rubbery case.
If printed with a good printer and tightened, there is no wiggle room inside for the spectroscope.
My print settings:
- printer: Prusa MK4S
- layer height: 0.2mm
- sheet: aliexpress
- nozzle diameter: 0.4mm
- print orientation: flat sides bottom
- material: Fiberlogy FiberFlex 40D
- supports: not needed
- brim: yes, 5mm (turned off Elephant foot compensation and Brim separtion gap)
- perimeters: 3
- solid layers (top/bottom): 5/4