Spectroscope case - FLEX print
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
TPU carry case for Spectroscope by PATON HAWKSLEY
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 62
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
I made a TPU case for my spectroscope purchased from https://www.patonhawksley.com/product-page/benchtop-spectroscope.
I used Fiberlogy FiberFlex 40D and initially, when I was screwing on the cap, it made squeaky noise, so I lubricated threads with hand cream, screw it once, unscrew and wiped it off. Fixed the issue immediately.
PETG might work as well as a material, but I wanted to have a rubbery case.
If printed with a good printer and tightened, there is no wiggle room inside for the spectroscope.
My print settings:
- printer: Prusa MK4S
- layer height: 0.2mm
- sheet: aliexpress
- nozzle diameter: 0.4mm
- print orientation: flat sides bottom
- material: Fiberlogy FiberFlex 40D
- supports: not needed
- brim: yes, 5mm (turned off Elephant foot compensation and Brim separtion gap)
- perimeters: 3
- solid layers (top/bottom): 5/4