1 / 2
The Sammie - Pocket-sized 12V Emergency Charger (USB-C PD) — zdjęcie 1
1 / 2

The Sammie - Pocket-sized 12V Emergency Charger (USB-C PD)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A small (50x50x15mm) charger for 12V lead-acid batteries

Ocena
0 / 5
Polubienia
1
Pobrania
5
Wydruki
0
Wyświetlenia
70
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Public Domain

A small (50x50x15mm) emergency charger for 12V lead-acid batteries. The name is a nod to the classic, heavy Finnish "Matti" chargers – but this one is the polar opposite: tiny and lightweight. Powered by a GaN USB-C phone charger; 20V would be ideal but 15V should be enough (check your chargers specs).

The 2A Mod: Standard CN3768 modules often come with an R600 resistor limiting the output to 0.2A. To reach a 2A charge rate, I replaced it with a 0.06 Ohm resistor.

Resistor specs used:

  • Value: 0.06 Ohm / 1% / 2 Watt

  • Type: SMD 2512 (approx. 6.35x3.2mm)

Components:

  • Charging board: CN3768 (3-stage 12V lead-acid module)

  • USB-C Trigger: PD/QC Decoy board (set to 20V)

  • Display: Smart Battery Monitor / Voltmeter

  • DC Jack: 5.5 x 2.1mm

Addendum (IMPORTANT):

A Schotty diode, IN5822 or better should be used between the CN3768 board and the DC jack. Positive from the display should be connected on the outer side (after the diode). 

Tagi