The Sammie - Pocket-sized 12V Emergency Charger (USB-C PD)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small (50x50x15mm) charger for 12V lead-acid batteries
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 70
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
A small (50x50x15mm) emergency charger for 12V lead-acid batteries. The name is a nod to the classic, heavy Finnish "Matti" chargers – but this one is the polar opposite: tiny and lightweight. Powered by a GaN USB-C phone charger; 20V would be ideal but 15V should be enough (check your chargers specs).
The 2A Mod: Standard CN3768 modules often come with an R600 resistor limiting the output to 0.2A. To reach a 2A charge rate, I replaced it with a 0.06 Ohm resistor.
Resistor specs used:
Value: 0.06 Ohm / 1% / 2 Watt
Type: SMD 2512 (approx. 6.35x3.2mm)
Components:
Charging board: CN3768 (3-stage 12V lead-acid module)
USB-C Trigger: PD/QC Decoy board (set to 20V)
Display: Smart Battery Monitor / Voltmeter
DC Jack: 5.5 x 2.1mm
Addendum (IMPORTANT):
A Schotty diode, IN5822 or better should be used between the CN3768 board and the DC jack. Positive from the display should be connected on the outer side (after the diode).