Flashing ball with vibration sensor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ball which will flash when droped or vibrated, using modules originally for flashing shoes.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Ball with flashing modules originally for shoes.
Can be purchased on Aliexpress for like $3 for ten pieces for example here.
Original size is 6cm.
Printed with supports.
Used PETG for better durability.
A added more perimeters and layers and 20% gyroid infill, but ball is then quite heavy so standard setting may be better and still durable enough.
I used variable layer height for better surface on top of half shere.
Then insert flashing modules, with side with leds facing outwards. Glue modules or insert some foam as spacing. Half spheres are connected using ring, glue it or it may hold even without glue.