WAVLINK AX3000 WiFi 6 Extender Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a wall mount for the WAVLINK AX3000 WiFi 6 Extender. Uses a cheap dollar store 2 prong extension cord.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 73
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
This is a wall mount for the WAVLINK AX3000 WiFi 6 Extender. Uses a cheap dollar store 2 prong extension cord.
These are decent little AP's but mounting on the plugin is not always and option. this allows a cheap 2 prong extension cord to be used and put mount to a wall or other flat surface.
I printed in PLA with 3 walls. PETG or ABS might be better if it is in sunlight or heat.
I printed on my Eleggo Neptune 4 plus with the bottom flat on the plate.
Print with supports if your printer needs it for the screw holes.
It is a little fiddly to get the screws to line up through the holes in the front but a magnetic bit helps and you only need 1 or 2 screws.