WAVLINK AX3000 WiFi 6 Extender Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a wall mount for the WAVLINK AX3000 WiFi 6 Extender. Uses a cheap dollar store 2 prong extension cord.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 73
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
This is a wall mount for the WAVLINK AX3000 WiFi 6 Extender. Uses a cheap dollar store 2 prong extension cord.
These are decent little AP's but mounting on the plugin is not always and option. this allows a cheap 2 prong extension cord to be used and put mount to a wall or other flat surface.
I printed in PLA with 3 walls. PETG or ABS might be better if it is in sunlight or heat.
I printed on my Eleggo Neptune 4 plus with the bottom flat on the plate.
Print with supports if your printer needs it for the screw holes.
It is a little fiddly to get the screws to line up through the holes in the front but a magnetic bit helps and you only need 1 or 2 screws.