Traxxas Maxx Auxiliary Battery Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds auxiliary battery for FPV setup.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 105
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This battery tray attaches to the body of the Traxxas Maxx V2 and is designed to hold a Tattu 3S 1300mah battery for an auxiliary power supply for an FPV setup. It is designed to be used with a 16mm wide hold down strap. The strap hole itself is 16.5mm wide. I used M3 screws with a washer that go up through the underside of the body cover after drilling holes in the cover.
I designed this with Onshape. If you wish to modify the design to fit your specific battery, you can find it on Onshape public documents by searching for "Tattu 3S 1300 Tray".
If you print this model, please upload a picture of it as a make so others can see it! Thank you!
Other info:
The FPV system seen in the pictures is a Walksnail Moonlight camera and Caddx GM3 gimbal. They are mounted to a baseplate made by @Basement_Creations and can be downloaded here: