194 modeli
These tires fit on the Traxxas X-Maxx, which I think is an awesome RC truck: https://traxxas.com/products/landing/x-maxx/ If you want tires that last a reasonable duration, here are links to Traxxas tires that will last far longer:…
I posted these before on thingyverse, but I dont like that site, just too slow, so as I am moving to this, thought I would share the design here too.
My knock-off version of the Traxxas X-maxx roof skid. Attaches just like the Traxxas part. Drill through the roof from underneath where there are skid attachment points in the body cage. Needed: (QTY) 4 each M3 x 20 button head machine…
Why? I needed space under the stairs :-) Features: Stable wall mount to grab the rear or frontal inferior wishbones Rc cars suspension locks the car in place and garantees a firm hold to the wall Width is designed for a WideMaxx Kit or…
Tired of buying and replacing the bumper mounts every time you turn on your X-Maxx? I was so I modeled up these bumper mounts. Hopefully these will be the last bumper mounts you will ever need. Front and rear mounts are included. Print…
Schneereifen, Sandreifen, Schaufelreifen für Traxxas Maxx und andere RC-Autos. Macht im Schnee sehr viel Spaß. Absolute Empfehlung! Sehr leicht konstruiert um Material und Druckzeit zu sparen. Trotzdem ist der Schneereifen sehr stabile…
A kit I created for my friends rc car. It should protect the car's body on a rollover - the way he drives, there are many rollovers believe me. :D Important is, this kit will not fit on the original X-Maxx body, it's designed to fit on…
I designed these skid plates to help protect the Pro-Line Brute body on my Traxxas X-Maxx. Printed from Ninjatek Armadillo TPU, they are very abrasion resistant and strong. *Note: these designs ARE NOT PERFECT. You will need to do the…
X-Maxx Basher Block Center drive shaft support block for 6s/8s Traxxas X-Maxx Four versions... One that uses bearings and one that does not, with and without fluting for extra space to use grease. Bearings used are (Qty 2) R1212-ZZ - 1/2…
My cousin got an XRT, and while it is the same frame/motor/etc it has a lower body than the X-Maxx so you need to V mount the fans it fits a 56mm motor and 40mm fans
My Xmaxx servo recently died and when I went to order a new one I decided to get new wheels as well because the stock ones were falling apart. When I went to take off the stuck wheels I realized I had no idea where my wheel wrench had…
Why? I didn't like the usual adapters that mount the ESC to the floor of the central chassis, because you always have to angle it upwards. In hard crashes it wobbled around. Additionally I needed the space in the central chassis pit to…
Stronger if printed on its side with supports. Gcode file is 50% infill. Files include with and without antenna tube mount. Note this was designed to fit with the VXL system. May not fit with the BL-2s system.
My cousin got himself a Traxxas XRT, and wanted more color on the truck so a few minutes in tinkercad, and there are blank, cutout, and labeled side crash/nerf bars for the XRT and X-MAXX(since they use the same bars/frame) I printed it…
This replaces the stock Traxxas Maxx (v2) battery latch system with a velcro strap system in order to use larger batteries. Just remove the two bolt on pieces and replace with these printed ones. Uses the stock screws for the front and…
Inspired by the original rear LED light bar bumper by theblackspyder , this is a new take on the design to make it closer to the original in appearance as well as internal fit to the bumper support for added strength. This should…
Max 5 ESC plate and Radio relocation box. Base Plate Technical Drawing PDF https://www.dropbox.com/s/n8oeqlaa6dvb8fq/X-Maxx%20Max5%20Base%20Plate%20Technical%20Drawing.pdf?dl=0 This is for relocating the radio receiver in the Traxxas…
A wall mounted holder for the Kreg Automaxx 76mm wood project clamp. I only have this size of the clamp, but it will probably fit other sizes of the clamp as well. Printed in PLA, infill 40, bottom down with pain-on-supports under the…
XC Tracer Maxx I/II flip case to mount your XC Tracer screen up or screen down, so you can leave your device on the cockpit without scratching it. Features: USB port and button accessible in flight position button covered in transport…
Suport for the traxxas xmaxx made in 4 peaces
Specialy for the proline xmaxx body you need only 4 screws m3 or m4 20mm long
Roof Skids for Proline Brute Body They attach through the body support. Drill a 3mm hole through the 4 holes in the body support through the roof. Required: (4) M3 nuts (4) M3 x 20 screws Category: R/C Vehicles
X-Maxx Hobbywing power switch mount Need: (2) M3 x 12 screws (4) M2.5 x 10 or (2) M3 x 10
Replaces the support beams from Traxxas part # 7734. Got my first X-Maxx and this either came pre-broken during shipping or on the first run. Print this part in TPU. I've used both 98A hardness and 95A hardness and they both worked. The…
These are clamp pads that slip over the 6" Kreg Automaxx Wood Clamp (https://www.kregtool.com/shop/clamping/clamps/wood-project-clamp---6/KHC6.html) metal clamping surfaces to help reduce marring. They may work with other Kreg clamps, but…
The rims and tires work perfectly! Snow paddle tires with rims that fit Traxxas Maxx or similar RC with 17mm hex. Based on the size and offset of the original Sledgehammer tires. Print the tires from TPE or very soft TPU. No support…
⚠ WARNING ⚠ This bit holder is intended to be mounted near the motor. I’m not sure how much placing a permanent magnet near a DC motor would affect its lifespan or efficiency, but I guess it's better to pick the magnet that's not too…
Check on my makerworld @kackb4 thats where you will get all of the 3d scans going forward
This is a bit holder for hex screwdriver bits for the battery of the Metabo Powermaxx cordless screwdriver. It may also fit for other Metabo tools using the same batteries. There are two versions, one is for the 4 Ah battery, the other…
I wanted to make a centered camera mount for my Traxxas X-maxx. This holds my GoPro Hero 10 Black but it should work for just about any GoPro. The model snaps onto the frame so I can come off easily in case of a crash but if you want it…
Traxxas Mini Maxx Drift Sleeves to slide onto the stock tires. Available on Etsy if you dont have a printer: https://www.etsy.com/listing/1878435795/traxxas-mini-maxx-drift-sleeves
this adds strength to the body by clipping onto the roll bars in the bed. Two versions
1 minute firing demo 1 minute blaster overview Reviews: BoomstickMods: https://youtu.be/hc5eouMWQyw Shaz: https://www.youtube.com/watch?v=yeSylI5rYSA The SillyMaxx 1400 is a homemade shell for the Nerf Titan air blaster! This design takes…
uses four 4mm countersunk screws and lock nuts and standard rc Velcro battery straps fits batteries that are: less than 146mm long less than or equal to 46mm wide depth/thickness depends on the Velcro straps you use
Fits perfectly in the chassis
The Maxx a comic book hero from the 90s as seen on MTV oddities The Maxx TAS
An accurate replacement Maxx Model R-Hop Tensioner 4.5mm for Maxx HopUp Unit, with optional rubber nub. If you want to use the “sorbothane” version, use the enclosed Sorbothane Cutting Template and a Gillette double-edge razor blade to…
The Maxx Schlappen is a futuristic slide inspired by the legendary Air Max sole design, reimagined with bold curves, dynamic cutouts, and a high-tech look. Whether as a display piece or a test print for wearable exploration, this model…
Why? I never understood why the RC community loves to use 4010 fan and cranks them up to crazy RPM just to provide some cooling, additionally for us bashers, they are of no use, since those tiny wings tend to break quite early. Features:…
Inspired by https://www.printables.com/model/227397-portable-drill-guide , I modelled this drill guide matching my Metabo PowerMaxx SB from scratch. Properties: Max. drill diameter 4.5 centimetres Max. drill length 16 centimetres Base…
Included are the 3d printed parts necessary for a DYI lighting kit I deigned for the Traxxas Xmaxx. This includes the parts for both headlights and tail lights. If you like this and would like to see something else, or if you have a…
Version 2.4: -Deeper groove for velcro to add the possibility of cover the original velcro(hook) with a piece of velcro(loop) to prevent harness rubbing when stored -Added Grip on removing tab for an easier remove. This support is made…
Apollo Launch Pad for Micro Maxx rockets This is actually a 'launch pad adapter' that can also be used as a display stand for your Micro Maxx. It's designed for the Micro Maxx Saturn V but as you can see it works well with the Space…
I always wanted a snow plow for my Xmaxx but some of the online rigs were way too expensive. So with some inspirations from some other designs here's one with a 15° angle to push snow off to the side. Sized for M5 hardware. No supports…
this adds strength to the body by clipping onto the roll bars in the bed
This is a mount made to protect your gopro by placing it inside the Traxxas Xmaxx. You do have to cut the windshield out of a body, but after that the mount is extremely adjustable. It can be moved forwards, backwards, and the camera can…
FOR METABO LC 40, 10,8 В, ЕС (627064000)
208 mm diameter - Currenlty printing it for trial run. Updated wheel rim for fitment 2/17 now works
Multiboard mounted friction fit holder for the Kreg Automaxx wood project clamps. Printed with 3 perimeters at 15% infill with PLA and a snug support on the Multiboard friction fit insert
Please read the description in the original. This remix is built lightweight without sacrificing functionality. Remix from: https://www.printables.com/model/526330-xc-tracer-maxx-iii-flip-case
Designed around 1" tube that connects the stand halves. Trim to your desired length based off of the T-MAXX chassis you have. Parts tray is an optional print. Requires Qty. 8 M3x10 FHMS for assembly.
Since I didn't have a real stand for my Xmaxx and I found the original one from Traxxas too impractical, I built something myself. As a template, I took the standard RC car stand. In addition, I modularized the entire booth a bit. This…
Mount for an IPhone 12 Pro Maxx to use with a Fanatec wheel base. Allow you to easily mount the phone for use with sim hub without any additional parts, rubber bands ect. Also included is a 5MM spacer if you have longer bolts.
I wanted to make a fan mount to add dual 30mm fans for my Traxxas Maxx with the Hobby wing 4278 motor. Should be able to work other motors. Hardware needed is 2 M3 cap screw or button head with about 11mm of threads. I used 30mm rocket…
I modeled the MaxXT adapter myself and tested it until it fits perfectly!
I needed to fit an X-Maxx spur gear to a Rustler 2WD gearbox, so I made this simple adapter. Use M3 x 7mm screws. Stock pads will fit, but metal pads are recommended to dissipate heat better. I printed in bridge nylon, 20% infill, 2…
Reverse engineered broken timer knob on my boots dryer
I could only find 2 Max6 G2 mounts compatible with the X-Maxx and I wasn't happy with either. This ones compatible with both the original Max6 and Max6 G2. Mounting - 2 M3x8mm screws for mounting the Max6 G2 to the plate. Anything longer…
Helps during rollovers that put stress on the unprotected rear part of the body. You can drill a hole for what sized screw you are going to use. I used a big bolt because that's what I had lying around, but I'm sure a smaller one could…
Für die Gourmetmaxx Heißluft-Fritteuse Digital 2,5l gibt es eine Abdeckung über dem Handgriff. Da die originale Abdeckung abgebrochen ist, anbei eine selbst modellierte Abdeckung zum ersetzen. Ich habe PLA und PETG ausprobiert. Bisher…
This is a working phone case I made to replace another one that was falling apart. Print settings I recommend: Support (grid) 100% infill the source files are included for fusion 360 (f3d and step files) Printed in YouSu's black 95A TPU…
Plaque d'immatriculation "589" pour Traxxas XMAXX Adapté pour 2 vis M2x4 (2mm) Percer le par choque avec une mèche de 1.5mm et visser directement dans le plastique. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports:…
grim reaper duck hood decor for the traxxas X-maxx wide maxx
This 3DW osVAC Adapter for MAXXT 5.0 replaces the original hose connector.
I wanted clamps for a Felder K500. I got the Felder manual ones but they were cumbersome and slow to set and release. I ended up using Kreg KBC6 Automaxx Bench Clamp, 6 Inch with this model to adapt it to the felder T-Slots. I've had…
Wallmount for CleanMaxx Vakuum Cleaner ADDED AN UPDATE. Now it is possible to slide in the cleaner both ways, that meas its possible to place it upside down. Print instructions i3MK2 0,35 mm layers 30% Infill
This is a from-scratch rebuild of the RoboForce figure Maxx Steele. It's about ⅔ the original scale. There's no pneumatic arm action, but I did include the button in the back that uses a ballpoint pen spring and the arms can bend inward…
This a remix I used ASA with 100% infill. I mean this is an Xmaxx so infill it to the max Right!! A 2 piece rim (ASA) and tire (TPU 85a) setup so I can have a hard rim to mount with screws and a soft rubber tire to touch the road. You are…
Bit holder Metabo for back panel. Designed for magnet size 10x20x4 mm Print Settings Rafts: No Supports: Yes Infill: 30% Filament: Flex TPU Category: Tools
English (translated): My in-laws bought the rope excavator for my son at the flea market. Unfortunately some parts were missing here. Among other things, the rear struts that hold the cable guide were missing. I have now rebuilt these…
this is a hood ornament for the traxxas xmaxx wide maxx you will have to size it because my printer is down right now and I am waiting on supports help to fix it so I have not been able to print this one but this is a remake to the first…
If any of you have a large scale RC car with Powerhobby XL wheels/tires, and enjoys letting their pooch chase it like a mechanical rabbit, you may be aware of how particularly vulnerable the sidewalls are to punctures and rips by an…
Wanted the Blade cavity on the nut side and thinner cutter exit points. Can now print Half 2 upright for multi-color
For people who wants the fans put vertical.
With this holder, the batteries can be attached to the compartment with straps instead of the original temples. Similar systems can already be bought as accessories from third-party manufacturers. However, I didn't want to drill into my…
Protection kit for XC Tracer Maxx II. (Paragliding variometer) USB-C & cord feed-through exempted With prusa slicer you can easily add your name in the top. (Individualisation)
This keeps your engine 30 to 40 degrees Celsius cooler. Motor size +/- 2mm. Requires two 40x20mm 12V fans . Four M3x25mm screws are needed to close the lid. Can be operated directly at the receiver via the BEC voltage. The case has space…
Printed at .2mm layer height with tree supports for the attachment tabs
A drop in replacement for the maxx hop bb release latch at the bottom of your maxx hop.
Un embout permettant de connecter une ponceuse Maxxt R7303 a en tuyaux d'aspiration Festool. Fichier STL et Freecad. Tester pour l'instant en PLA, couche 0,2mm, 25% de remplissage, 6murs
Please read printing instructions More 6×6 parts are on the way. Follow my Cults3D page for upcoming releases: https://cults3d.com/:4122776 This is a fully custom exposed differential housing engineered specifically for E‑Maxx 6×6…
Separated bodyblock and pipe pieces for the Sillymaxx 1500 to reduce the amount of supports used for the parts, as they usually have rafts and supports, wasting a huge amount of material. Also allows color separation of the parts much…
The plastic component in the kettle lid hinge is fragile and can snap. This is a replacement part that works for my kettle but may work on other similar models from Gourmetmaxx.
A simple replacement barrel lug for the Supermaxx 5000 family of blasters. Fitted for 1/2in CPVC to be glued in. Can be edited easily to fire other types of ammo. Video showing the part: https://www.youtube.com/watch?v=ouISxhi7p7A…
DE: Einfacher Halter für einen Metabo PowerMaxx BS Quick (10,8V). Schraubbefestigung durch zwei gesenkte 5mm Bohrungen in der Montageplatte. Gedruckt mit Support für die Schraublöcher (geht vielleicht auch ohne). EN: Simple holder for a…
Gens Ace battery holder adapter for easy mounting of Gens Ace B-50C-5000-4S1P-Bashing 5000mAh 14.8V 4S LiPo battery 60C XT90. Fits perfect into the original Traxxas Maxx wideboy battery place. No more slipping of the too small battery.…
Motor mount for Traxxas X-Maxx, designed for a Castle 1717 series 48mm motor. Includes a version with an integrated fan mount and one without, and a 1mm spacer that can be used to shim the mount to fit larger gears. Without shimming, it…
This is a case model for the extended capacity Motorola XT926 (Droid Razr Maxx HD) -- not the Droid Razr M, or the Droid Razr HD, or the Razr HD. It's not a parametric model for all different phone shapes imaginable, although it might be…
I created this No Face decoration plate for a spirited away themed pc. It fits on a DEEPCOOL GAMMAXX GT tower cooler. The cooler has a RGB light under a metal plate. Just unscrew top metal plate and replace. All of the colors are…
adds strength to the body by clipping onto the roll bars in the bed
This bracket holds a standard Cerality style endstop that can be positioned on end of the X-axis to trigger a DLSR camera for timelapse photography of your prints. Tested on Ender 3 and Lotmaxx SC-10, but should work on most printers that…
Couldn't find a retail option to mount a new fan and everything was made for the Maxxfan Deluxe which is a different size. Couldn't use Butyl tape because of the rough texture of the raptor paint (I don't think so anyway!). This model is…
1-1/2" Hydromaxx Flexible Corrugated HDPE Non-Split Tubing Wire Loom Adapter to 1-1/2" NPT This design was created by request from another Printables member based off of a similar design I posted. I have printed and confirmed the 1-1/2…
Jedná se o držák fólie a zároveň i plnič pro folie MAXXO který vám zanechá okraj fólie čistý pro následné zavaření. POKUD SE MODEL LÍBÍ DEJTE PROSÍM LIKE A STAHUJTE DĚKUJI
EASYmaxx Wäscheständer Vario repair Kit Printed with PETG to better resist with outdoor conditions Glue the cover (dessus_multi) on the main part (multi_porte-cintres) Mount the 3 hanger rack (porte-cintres) on the main part with screws…
Ersatz für das bogenförmige Original-Teil. Kann ohne supports gedruckt werden.
