Xmaxx wheel nut tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My Xmaxx servo recently died and when I went to order a new one I decided to get new wheels as well because the stock…
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 219
- Wydruki
- 0
- Wyświetlenia
- 1037
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
My Xmaxx servo recently died and when I went to order a new one I decided to get new wheels as well because the stock ones were falling apart. When I went to take off the stuck wheels I realized I had no idea where my wheel wrench had was. I didn't want to use pliers on the wheel nuts as this would likely tear them up, scratch them, and damage them. As a solution I designed and printed a new one.
I designed this and printed in ABS. I'm not sure how the scaling will work with other materials, but if printed in (Hatchbox White) ABS the finished product should be a PERFECT fit for the X-maxx wheel nuts. The fit in the picture is straight off the print bed with no post-print work.
Print instructions
I designed this and printed in ABS. I'm not sure how the scaling will work with other materials, but if printed in (Hatchbox White) ABS the finished product should be a PERFECT fit for the X-maxx wheel nuts. The fit in the picture is straight off the print bed with no post-print work.
You'll most likely want to use a brim (I did a 5mm brim) to keep the two edges of the handle with minimal surface contact from curling.
I also printed this with 3 perimeter layers. adding more with a .4 nozzle created gaps and weird fill. I didn't want less due to the nature of the tool.