Xmaxx wheel nut tool
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My Xmaxx servo recently died and when I went to order a new one I decided to get new wheels as well because the stock…
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 219
- Makes
- 0
- Views
- 1,037
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
My Xmaxx servo recently died and when I went to order a new one I decided to get new wheels as well because the stock ones were falling apart. When I went to take off the stuck wheels I realized I had no idea where my wheel wrench had was. I didn't want to use pliers on the wheel nuts as this would likely tear them up, scratch them, and damage them. As a solution I designed and printed a new one.
I designed this and printed in ABS. I'm not sure how the scaling will work with other materials, but if printed in (Hatchbox White) ABS the finished product should be a PERFECT fit for the X-maxx wheel nuts. The fit in the picture is straight off the print bed with no post-print work.
Print instructions
I designed this and printed in ABS. I'm not sure how the scaling will work with other materials, but if printed in (Hatchbox White) ABS the finished product should be a PERFECT fit for the X-maxx wheel nuts. The fit in the picture is straight off the print bed with no post-print work.
You'll most likely want to use a brim (I did a 5mm brim) to keep the two edges of the handle with minimal surface contact from curling.
I also printed this with 3 perimeter layers. adding more with a .4 nozzle created gaps and weird fill. I didn't want less due to the nature of the tool.