70mm Wheel for Economy Gearbox
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed to fit the "economy" or "low cost" plastic gear motors and is aimed at Mini-Sumo and small wheeled robots,
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 257
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These wheels are designed to fit the "economy" or "low cost" plastic gear motors and is aimed at Mini-Sumo and small robots with rubber band tyres.
This remix is aimed at the #84 bands and is 70mm diameter to give clearance on a battery box mounted below the gearbox.
Instructions
This wheel was designed on Creo Elements, and printed on a Printrbot Simple Metal using Repetier Host with Slicer.
These wheels are sized to fit #84 rubbers bands with a 10% stretch but multiple narrower bands could be used.
It's pictured with a couple of bands overlaid to make up the diameter until we modify our chassis.
The Printrbot equipment was made available by Tanghall Smart Tech Club in York, England.
Category: Robotics