70mm Wheel for Economy Gearbox
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed to fit the "economy" or "low cost" plastic gear motors and is aimed at Mini-Sumo and small wheeled robots,
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 28
- Makes
- 0
- Views
- 258
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These wheels are designed to fit the "economy" or "low cost" plastic gear motors and is aimed at Mini-Sumo and small robots with rubber band tyres.
This remix is aimed at the #84 bands and is 70mm diameter to give clearance on a battery box mounted below the gearbox.
Instructions
This wheel was designed on Creo Elements, and printed on a Printrbot Simple Metal using Repetier Host with Slicer.
These wheels are sized to fit #84 rubbers bands with a 10% stretch but multiple narrower bands could be used.
It's pictured with a couple of bands overlaid to make up the diameter until we modify our chassis.
The Printrbot equipment was made available by Tanghall Smart Tech Club in York, England.
Category: Robotics