1 / 3
Cycplus R200 Tennisball Rocker Feet — zdjęcie 1
1 / 3

Cycplus R200 Tennisball Rocker Feet

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Low profile Tennisball Rocker feet for the Cycplus R200 smart trainer, two variants for one or two tennis balls.

Ocena
0 / 5
Polubienia
6
Pobrania
90
Wydruki
0
Wyświetlenia
319
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Indoor Sports
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

You can use the 1 or 2 ball versions depending on your personal preferences and weight. 

This special design uses the original feet as screws to secure the printed feet, so except for 4 to 8 tennis balls no additinal parts are needed. Also you can use the original feet to adjust the possible amount of movement.

Printing recommondations:

  • PETG

  • Layerheight: 0,25mm

  • 5 walls

  • Infill: min. 15%

  • no supports required

Installation:

  • Remove the original plastic endplugs and screw-on feet from the frame.

  • Snap in 1 or 2 tennisballs

  • Slide the printed feed onto the frame

  • Secure the feet with the original screw-on feet

Tagi