Cycplus R200 Tennisball Rocker Feet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Low profile Tennisball Rocker feet for the Cycplus R200 smart trainer, two variants for one or two tennis balls.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 90
- Makes
- 0
- Views
- 319
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
You can use the 1 or 2 ball versions depending on your personal preferences and weight.
This special design uses the original feet as screws to secure the printed feet, so except for 4 to 8 tennis balls no additinal parts are needed. Also you can use the original feet to adjust the possible amount of movement.
Printing recommondations:
PETG
Layerheight: 0,25mm
5 walls
Infill: min. 15%
no supports required
Installation:
Remove the original plastic endplugs and screw-on feet from the frame.
Snap in 1 or 2 tennisballs
Slide the printed feed onto the frame
Secure the feet with the original screw-on feet