HSW Holder for Bopla Enclosure 240×80 with Embedded M4 Nuts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
HSW holder for Bopla 240×80 enclosure. Uses embedded M4 nuts to screw the case securely to the mount.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 21
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a Honeycomb Storage Wall (HSW) holder for a Bopla enclosure sized 240 × 80 × 60 mm. The holder fits into a standard HSW slot and allows the enclosure to be mounted securely on the wall.
The enclosure is attached using M4 screws and embedded M4 nuts inside the holder, providing a strong and reliable mounting solution.
This holder was designed for the following enclosure:
I also uploaded a separate drilling template for this project to make it easy to mark and drill the mounting holes in the enclosure.
A simple and practical solution to mount larger electronics enclosures neatly on the Honeycomb Storage Wall.