HSW Holder for Bopla Enclosure 240×80 with Embedded M4 Nuts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
HSW holder for Bopla 240×80 enclosure. Uses embedded M4 nuts to screw the case securely to the mount.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 21
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a Honeycomb Storage Wall (HSW) holder for a Bopla enclosure sized 240 × 80 × 60 mm. The holder fits into a standard HSW slot and allows the enclosure to be mounted securely on the wall.
The enclosure is attached using M4 screws and embedded M4 nuts inside the holder, providing a strong and reliable mounting solution.
This holder was designed for the following enclosure:
I also uploaded a separate drilling template for this project to make it easy to mark and drill the mounting holes in the enclosure.
A simple and practical solution to mount larger electronics enclosures neatly on the Honeycomb Storage Wall.