Drilling Template for Bopla Enclosure 240×80 for Banana Jacks (Lab Sockets)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drilling template to accurately place and drill holes for banana jacks (lab sockets) in a Bopla 240×80 enclosure.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 41
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a drilling template for a Bopla enclosure sized 240 × 80 × 60 mm. It is used to accurately mark and drill the holes for banana jacks (lab sockets) so they are cleanly and evenly aligned in the enclosure.
The template makes positioning the holes much easier and helps to achieve clean and repeatable results.
Important note:
The two holes on the right side do not fit into the enclosure. If you do not want to remove material from the enclosure, simply leave out the two right holes. The template works perfectly fine with the remaining holes.
This template was made for the following enclosure:
This is only the drilling template for the banana jacks. The HSW holder for the enclosure is a separate upload.
The frame for the LCD display is also a separate upload and is not part of this model.