1 / 4
Drilling Template for Bopla Enclosure 240×80 for Banana Jacks (Lab Sockets) — image 1
1 / 4

Drilling Template for Bopla Enclosure 240×80 for Banana Jacks (Lab Sockets)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Drilling template to accurately place and drill holes for banana jacks (lab sockets) in a Bopla 240×80 enclosure.

Rating
0 / 5
Likes
1
Downloads
3
Makes
0
Views
41
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial

This is a drilling template for a Bopla enclosure sized 240 × 80 × 60 mm. It is used to accurately mark and drill the holes for banana jacks (lab sockets) so they are cleanly and evenly aligned in the enclosure.

The template makes positioning the holes much easier and helps to achieve clean and repeatable results.

Important note:

The two holes on the right side do not fit into the enclosure. If you do not want to remove material from the enclosure, simply leave out the two right holes. The template works perfectly fine with the remaining holes.

This template was made for the following enclosure:

https://www.conrad.de/de/p/bopla-euromas-et-224-63224300-industrie-gehaeuse-240-x-80-x-60-abs-lichtgrau-ral-7035-1-st-1388478.html

This is only the drilling template for the banana jacks. The HSW holder for the enclosure is a separate upload.

The frame for the LCD display is also a separate upload and is not part of this model.

Tags