Replacement crank for classic Playskool Busy Gears
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement crank for use with the classic Playskool Busy Gears set (c. 1990-ish).
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 27
- Wydruki
- 1
- Wyświetlenia
- 382
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a replacement crank for the vintage Playskool Busy Gears set:
I did not have an original to model, so my version is a bit different (it has an octogonal interface and a print-in-place handle spinner for maximum fun).
The edges are rounded and bevelled for comfort, but I strongly advise not stepping on it barefoot.
The interface diameter is 25 mm x 12 mm, and the crank length is 70 mm (centre-to-centre). The print-in-place spinner is designed for 0.2 mm layer height.
To keep it as a single piece, it prints with supports under the crank body.