Replacement crank for classic Playskool Busy Gears
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.47 – €1.80 net (excluding VAT)
For file: crank r2_0.2mm_PLA_205C_1h42m_20g.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.64 excluding VAT (range midpoint).
- Weight reported by the author
- 19 g
- Print time reported by the author
- 1.71 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a replacement crank for use with the classic Playskool Busy Gears set (c. 1990-ish).
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 27
- Makes
- 1
- Views
- 382
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a replacement crank for the vintage Playskool Busy Gears set:
I did not have an original to model, so my version is a bit different (it has an octogonal interface and a print-in-place handle spinner for maximum fun).
The edges are rounded and bevelled for comfort, but I strongly advise not stepping on it barefoot.
The interface diameter is 25 mm x 12 mm, and the crank length is 70 mm (centre-to-centre). The print-in-place spinner is designed for 0.2 mm layer height.
To keep it as a single piece, it prints with supports under the crank body.