1 / 5
QIDI Q2 Poop Chute / Purge Chute
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Purge chute for the QIDI Q2 that uses two longer M3 screws.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 269
- Wydruki
- 1
- Wyświetlenia
- 1141
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (14)Powiązane
A purge chute I made for the QIDI Q2 and the QIDI Box to collect waste filament, because I needed something that is slim and easy to remove. The attachment is very simple, you just need to unscrew the two existing M3 bolts and screw in slightly longer M3 bolts. Print with supports at 0.20mm - 0.28mm.
I used M3x16mm, but M3x10, M3x12 and M3x20 are all fine. It's possible some imperial screws could also fit.