1 / 5
QIDI Q2 Poop Chute / Purge Chute — image 1
1 / 5

QIDI Q2 Poop Chute / Purge Chute

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Purge chute for the QIDI Q2 that uses two longer M3 screws.

Rating
5 / 5
Likes
6
Downloads
269
Makes
1
Views
1,141
Reviews
1

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Share Alike

A purge chute I made for the QIDI Q2 and the QIDI Box to collect waste filament, because I needed something that is slim and easy to remove. The attachment is very simple, you just need to unscrew the two existing M3 bolts and screw in slightly longer M3 bolts. Print with supports at 0.20mm - 0.28mm.

I used M3x16mm, but M3x10, M3x12 and M3x20 are all fine. It's possible some imperial screws could also fit.