Lack Rack Pro 2U middle section for use with Penn Elcom 18U Rails
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2U middle section for the Lack Rack Pro with mounting holes aligned to Penn Elcom 18U rack rails.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 102
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
As with others, I had difficulty sourcing Adam Hall 18U rack rails. I found some reasonably priced rails from Penn Elcom (Part # R0863-18) which worked with the top and bottom parts, but the pre-drilled holes did not align with the middle parts from the Lack Rack Pro. This is a 2U version of the middle section with holes that align with the centre of each U.
Notes:
The Penn Elcom rails only align with one hole of the top and bottom parts from the original Lack Rack Pro.
I needed to enlarge the mounting holes from 5mm to 6mm to accept the M6 bolts.
Thanks to hecristi for the original model!