Multimeter Stand for Uni-T UT60BT

Stand / Housing for Uni-T UT60BT Multimeter and its Accessories:

Sarcophagus stand with rear drawer (for storing the thermal probe and others stuff), probe and test tweezers holder (with a back pocket to store tweezers connectors) and hooks on the sides for holding cables...

Non-printing necessary accessories:
◦ M3 Heat-set nuts, outer diameter 5 mm x height 4 mm (6 pcs)
◦ M3 16 mm countersunk head screws (6 pcs)

Recommended Print Settings: 🖨⚙
◦ Material:                PLA, PETG
◦ Nozzle diameter:  0.6 mm
◦ Layer height:         0.3 mm
◦ Perimeters:            2 (with 0.4 nozzle use 3 perimeters)
◦ Infill:                       25%
◦ Print speed:          ~ 30 mm/s
◦ Print orientation:  As in STL files
◦ Support:                No

Notes: 
The stand is suitable for test probes with foam grips (e.g. MaAnt P22A), but you can also use regular probes that come with the multimeter.

I also have a stand for the smaller Uni-T multimeter UT123T, which you can find on Printables here: Multimeter Stand for Uni-T UT123T

Assembling: 

1. Prepare the Drawer:
Insert two heat-set nuts into the bottom stop hook and screw it together with the rear grip hook to the drawer itself using 16 mm M3 screws:

2. Prepare the Stand: 
Insert four heat-set nuts into the multimeter stand and then screw in the two hooks using 16 mm M3 screws:

✔ Once you're done, you can equip the stand with your accessories: