Billsbro: handle 120 mm and drilling template
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is a model for the Billsbro handle hat you can also use as a drilling guide for the original handle.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 81
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Centering my Billsbro handles was taking too much time, so I recreated the design with a center hole in the back. That way you can mark the top center of the drawer, align this mark with the hole in the part and drill your screw holes.
I then designed the remaining of the handle to fit perfectly the original design. There are other models out there, but they did not exactly fit the orginial Billsbro dimensions.
Print on the side with support, use a large brim and reduce the distance between the handle and the supports to improve the stability of the print.
Enjoy!