1 / 10
Radiator Door Bumper for Mirrored Wardrobe – No More Broken Glass (3 Versions, 3D Printable) — zdjęcie 1
1 / 10

Radiator Door Bumper for Mirrored Wardrobe – No More Broken Glass (3 Versions, 3D Printable)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This set of 3D printable parts is designed to protect mirrored wardrobe doors from hitting a metal radiator when opening

Ocena
0 / 5
Polubienia
2
Pobrania
7
Wydruki
0
Wyświetlenia
90
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License

Description

This set of 3D printable parts is designed to protect mirrored wardrobe doors from hitting a metal radiator when opening.
It prevents cracks, chips, and catastrophic glass breakage by absorbing and limiting the impact between the door and the radiator.

The system includes three functional variants:

Version 1 – Simple PETG Bumper (Bottom Mount)

A rigid, compact protector mounted at the bottom area, creating a safe mechanical stop between the door and the radiator.

Version 2 – PETG Bumper with Rubber Pads (Bottom Mount)

An upgraded version with integrated rubber buttons for:

  • Shock absorption

  • Noise reduction

  • Extra safety for fragile mirror glass

Version 3 – Upper Radiator Guard (Top Mount)

A top-mounted PETG protector installed directly on the radiator, acting as a soft contact surface for the door and preventing metal-to-glass contact at the upper edge.

Together, these parts offer full protection both low and high, covering real-life opening angles and accidental over-travel.

Features

  • Protects mirrored doors from cracking

  • Prevents metal-to-glass impact

  • No drilling into the door or radiator

  • Easy clip-on / slide-on mounting

  • 3 functional variants for different setups

  • Child-safe and apartment-friendly

  • Designed for PETG durability and heat resistance

Printing Recommendations

  • Material: PETG (recommended for heat resistance near radiator)

  • Layer height: 0.2 mm

  • Infill: 20–30%

  • Walls: 3–4 perimeters

  • Rubber buttons (Version 2): TPU or standard rubber pads

  • No supports required (depending on orientation)

Disclaimer

This is a custom, non-OEM, 3D printable safety accessory.
Not affiliated with any furniture or heating equipment manufacturer.

Enjoying the model?

If this design made your day a bit better or your print setup cooler, and if you’re feeling generous, you can buy me a coffee on Ko-fi!

Your support helps me keep creating and sharing more awesome stuff.

Support me here: https://ko-fi.com/adrian_m2025

Thanks a ton — and happy printing!

Tagi