1 / 10
Radiator Door Bumper for Mirrored Wardrobe – No More Broken Glass (3 Versions, 3D Printable) — image 1
1 / 10

Radiator Door Bumper for Mirrored Wardrobe – No More Broken Glass (3 Versions, 3D Printable)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This set of 3D printable parts is designed to protect mirrored wardrobe doors from hitting a metal radiator when opening

Rating
0 / 5
Likes
2
Downloads
7
Makes
0
Views
90
Reviews
0

Updated at source:

Model information

License
Standard Digital File License

Description

This set of 3D printable parts is designed to protect mirrored wardrobe doors from hitting a metal radiator when opening.
It prevents cracks, chips, and catastrophic glass breakage by absorbing and limiting the impact between the door and the radiator.

The system includes three functional variants:

Version 1 – Simple PETG Bumper (Bottom Mount)

A rigid, compact protector mounted at the bottom area, creating a safe mechanical stop between the door and the radiator.

Version 2 – PETG Bumper with Rubber Pads (Bottom Mount)

An upgraded version with integrated rubber buttons for:

  • Shock absorption

  • Noise reduction

  • Extra safety for fragile mirror glass

Version 3 – Upper Radiator Guard (Top Mount)

A top-mounted PETG protector installed directly on the radiator, acting as a soft contact surface for the door and preventing metal-to-glass contact at the upper edge.

Together, these parts offer full protection both low and high, covering real-life opening angles and accidental over-travel.

Features

  • Protects mirrored doors from cracking

  • Prevents metal-to-glass impact

  • No drilling into the door or radiator

  • Easy clip-on / slide-on mounting

  • 3 functional variants for different setups

  • Child-safe and apartment-friendly

  • Designed for PETG durability and heat resistance

Printing Recommendations

  • Material: PETG (recommended for heat resistance near radiator)

  • Layer height: 0.2 mm

  • Infill: 20–30%

  • Walls: 3–4 perimeters

  • Rubber buttons (Version 2): TPU or standard rubber pads

  • No supports required (depending on orientation)

Disclaimer

This is a custom, non-OEM, 3D printable safety accessory.
Not affiliated with any furniture or heating equipment manufacturer.

Enjoying the model?

If this design made your day a bit better or your print setup cooler, and if you’re feeling generous, you can buy me a coffee on Ko-fi!

Your support helps me keep creating and sharing more awesome stuff.

Support me here: https://ko-fi.com/adrian_m2025

Thanks a ton — and happy printing!

Tags