4,472 models
An anti-sphere inspired plant pot, giving it a very spacy and futuristic design loking like it is coming from the year 2148 ! Your plants will love it! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top…
Print approx. €1.79–€2.19 excl. taxPreliminary estimate for one variant
🇪🇸 ¡Bienvenidos a Santiago de Compostela! This model was created in collaboration with 3D artist Marc Mons . NOTE - This model cannot be sold physically or digitally, even if you are a subscriber of the MiniWorld Reseller License tier. It…
Print approx. €2.09–€2.55 excl. taxPreliminary estimate for one variant
Printer feet should: Not wobble, be firmly connected to the frame, and support the printer Isolate and eliminate vibrations to improve print quality Dampen noise caused by those vibrations to improve quality of life In addition, if you…
Print approx. €2.49–€3.04 excl. taxPreliminary estimate for PETGSource material: PET
Constantine St. Benedict Zippo Stash Box.
Print approx. €22.50–€27.50 excl. taxPreliminary estimate for one variant
This is a protective case that I made for the Novritsch Anti Fog Unit because I am paranoid it's getting shot at and destroyed. I printed it in PETG and used spray paint to give it it's texture. It should also be fine when printed in PLA.…
Print approx. €3.39–€4.15 excl. taxPreliminary estimate for PETGSource material: PET
Inspired by the Atlantis display at Kennedy Space Center, Florida, here is an add-on for the 3D Shuttle Stand. Attached is the gcode to pause the print at layer 20 in order to change filament color. Also attached, is the NASA logo to be…
Print approx. €2.20–€2.69 excl. taxPreliminary estimate for one variant
A connector to make a pentagonal antiprism out of straws.
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
To print from STL make the oIn board game Stationfall there is only a token for a antimatter. This antimatter looks like that one on that token. Useful when you have 3D figures for this game. To print from STL make the object bigger 606%…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
Meine Lampe ist mit einer 4W LED in einem G9 Sockel bestückt. My lamp is equipped with a 4W LED in a G9 base. Halogenleuchtmittel sind nicht geeignet! Halogen bulbs are not suitable!
Print approx. €1.86–€2.27 excl. taxPreliminary estimate for one variant
Only works with Protective Cap (can be found on my profile). Metric thread M24 Number of perimeters: 4 Bottom wall thickness: 1 mm Top wall thickness: 1 mm Internal fill: 40% Material: PETG (ESD)
Print approx. €0.48–€0.58 excl. taxPreliminary estimate for PETGSource material: PET
Only works with an anti-freeze plug for heat-conductive paste (can be found on my profile). Number of perimeters: 4 Bottom wall thickness: 1 mm Top wall thickness: 1 mm Internal fill: 40% Material: PETG (ESD)
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for PETGSource material: PET
Card Slinger 3.0 for MTG / ManaBox App- Easily scan in bulk quantities of cards by hand - Now for sleeved and un-sleeved cards You MUST print the base and insert in transparent or white filament, it will not work properly otherwise.…
Very happy with this creation, it's a 35:1 print-in-place dual stage planetary gear system (sun 1 : ring 2). The really cool thing is that the rings won't shift without the inner gears being turned, so no back-driving ; the arms are…
I'm glad to introduce you the latest version of my cantilever tool box! Take all the necessary tools with you Easy to use and store Print-only design, no metal parts or glue required Clip and snap assembly Rigid and durable PARAMETRIC.…
My MK3 printer stands on an Ikea Lack table, which is an excellent amplifier for the vibrations of the printer. So I designed these feet, and they do a good job without making the printer too wobbly. A low profile version and a small…
For people who own this printer, they are familiar with the weak vertical construction. Because of the shaking the printing quality is suffer. So I made this to prevent the problem. After mounting it, the better surface finish was…
Support me & Buy a T-shirt The Cantilever box is compatible with SBox for MK2/3/4 - stackable toolbox system and is intended for printing on the Prusa MK4 size 3D printer. Assembly list of non-printed parts 16 pcs - metal axis 36( 35 )mm…
This is my model of the Atlantis as seen in Stargate Atlanis tv series. Model is over 60cm in diameter and approaches 3 kilos. It has already built in preparation for the LED lights so if you want to make the towers and stardrive lit, you…
Support me & Buy a T-shirt The Cantilever box is compatible with SBox for MINI - stackable toolbox system and is intended for printing on the Prusa MINI size 3D printer. The bigger size for Original Prusa i3 MK2/3 is available - SBox for…
We know some of you have been waiting for this quite some time, so here it is! - The new Anti-Sphere Pot 2! (now with only 9 spheres in a row) Used Filament: This model was printed using Gunmetal Matt PLA from FormFutura The FormFutura…
Romantic Couple Decor . Feel free to scale it as desired. Fast and easy print. Printed with Fuzzy Skin effect. Fuzzy Skin: All walls Fuzzy Skin Point Distance: 0.4 Fuzzy Skin thickness: 0.2 Happy printing! With more and more questions…
This little print-in-place container features a satisfying snap-action lid that swings over 180 degrees. This extra range lets the lid flip all the way out of the way so the box will be stable with the lid open or shut. This special hinge…
Maj 30/06/24 : https://www.printables.com/model/927111-anti-pluie-piege-anti-frelon addition test piece anti rain hat suspension Part to test because no more printer working at the moment... fixing with petg wire as attachement Thanks in…
V2 available here: https://makerworld.com/de/models/1577703-bambulab-anti-vibration-feet-v2-p1p-x1c-p1s-tpu#profileId-1660067 These are anti-vibration feet for the Bambu Lab X1/P1P, inspired by the original ones that can be bought in the…
Support me & Buy a T-shirt The Cantilever box is compatible with SBox for MK2/3/4 - stackable toolbox system and is intended for printing on the Prusa MK4 size 3D printer. Assembly list of non-printed parts 8 pcs - metal axis 36( 35 )mm x…
(IMPORTANT) Please download the User Guide for HULA v1.0. I do my best to double-check and test the print profile I created. They are up to date with the latest changes made to the designs. If you wish to purchase ready-to-use HULA feet…
Pillar to keep your GPU in place. Should allow for around 8,5 cm to 9,5 cm tall. Print Settings Supports: No Resolution: 0.2mm Infill: 20%
These feet here are designed for all printers, which are using V-Slot 4040 extrusions as frame. So if these feet are working with your printer, and your printer is not listed yet, please tell me, so I can add the printer to the list.…
NEW UPDATE: Behold an improved and raised version! I extended the bellow section to add one more to prevent bottoming out during Ludicrous mode prints Added more thickness to the adapter interface for more high frequency vibration damping…
PFM-1 (противопехотная фугасная мина) is a Russian scatter anti-personnel mine. There is also a PFM-1S version, but it differs only slightly. The model consists of two parts connected by a thread (body and head). The head piece is…
Hello! I've recently created anti-vibration feet for the Ender 3 V3 SE printer. These feet leverage the original rubber components that come pre-attached to the printer. Simply slide the new feet onto the existing ones, and you're good to…
This is a replica of the ancient Antikythera Mechanism found in a shipwreck near Antikythera dating back to ~200a BC. It is based on a slightly modified arrangement of the Freeth & Jones model with significant inspiration of Wright's and…
Anti Vibration feet for Flashforge Adventurer 5m. The rear feet sit at a 45 degree angle to be able to fit. These make the printer feel and sound a lot more solid and help reduce vibrations tremendously. I'm not sure if it is necessary…
Protect your wipers in the winter for a minimal cost! Even 1 clip will move your wiper away if placed in the center → use more clips for longer wipers Wiper edge does rest in the empty space, so the rubber is not deformed Bottom is…
I created these to reduce noise and get better print quality. Use tape/string/zip ties to make side walls for better stability. Put the smaller ones on the rear of the printer. Print using PET-G. These do seem to be working till some…
Hydroponic Planting System is a remix is not only my designee, and I think maybe some of you will like and need one I have adapted to my designee the pot support and the lock mechanism. The module has 3x planting spot's with a 3mm wall…
I saw this type of wine stand a few days ago but could only find it made of wood, so I decided to design my own. I printed several until I found one that fit most of the bottles I had, printed quickly, and was sturdy. I incorporated a…
Hello everyone, This model serves as a cover for the wiring and board that remain exposed after removing the stock shroud from the Kobra 2 series while installing the Mantis fan duct.…
The rings have a diameter of 20 mm, 17 mm. (Making more later)
Print with PLA or PETG without support. I printed Z=0,3 started with white color and changed to green on Z=1,1 Use double side glue to fix it on the wall.
The Manticore is (to my knowledge) the first shell-ejecting blowback 40mm launcher in the world. It uses HPA to cycle short 40mm grenades (shells shorter than 90mm), and fires in semi-auto. I recommend printing all of the parts for this…
Anti-Vibration Foot / Shock Absorbing Pad – 3D Printable This anti-vibration foot is designed to reduce noise and vibration from machines and devices. Its stepped, layered geometry helps absorb movement and minimize transmitted vibration…
This is a GPU anti sag support holder. It is designed to be as minimalistic as possible. It is intended to be used with Fractal Design Meshify 2 Compact case, but it can work with other cases close in shape and size. Similar metal-made…
Anti Bounce Weight Has serration for forward assist which extends a bit back to impact buffer, slowing down the bolt. A Rubber Pad can also be installed to further reduce rearward travel impact. A separate Locking Pad is fixed in place…
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
This system prevents the TS55 saw leaving the guide rail FS when cutting with the sloped blade. Even with a 45 degree angle the saw remains secure on the rail thanks to the 2 stops screwed on the sole of the saw Inspired and adapted from…
This bookmark features the leaves and flowers of the tradescantia , which is also known as the wandering jewel, inchplant, or dayflower. (I think it's probably tradescantia zebrina .) I originally designed this as a gift for my friend ,…
Thanks to https://www.printables.com/@Toonerit for original model for 3 Max, this one update for 4 Max to hold auxiliary fan cable/
Anti-vibration feet for Elegoo Neptune 3 Pro. I used them to isolate the printer from the enclosure I built to reduce noise, they are quite effective. They fit onto the existing rubber feet of the printer. Printed with Devil Design Black…
Back in Black! For no other reason than because I have more bulk black than white this time. This is the second revision of my canter lever filament spool winder. You can find my first version here , along with the original description,…
This is my dream filament clip, designed to prevent the end of the filament getting tangled in the spool, being easy to remove and add, and it doesn't pop off when you put the spool away because the design sits inside the spool itself. To…
IF LOOKING FOR VERSION 2 OR 1 THEN CLICK RIGHT HERE ! SUMMARY OF CHANGES MADE WITH THE VERSION 3 !!! The current version of these is 3. They use over 55% less plastic than the previous edition and are over 2.5mm lower as well. I also…
The source marked this model as adult content.
This is the third of six ship models designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and to the Atlantis model by mere friction. Video about the project is here:
Attention! This is only the customized top part! please print the rest from https://www.printables.com/de/model/705295-creality-ender3-v3-ke-anti-shake-construction I have shortened the top part of the Anti shake construction for the…
You can use 1 or multiple of this screw to prevent wear on the PCIE slot for your GPU. It will not melt if printed in PLA.
Statue created as entry for the Prusa Printers contest
This interlocking hearts decoration is a clean and elegant 3D printable model symbolizing love, connection, and togetherness. The smooth heart outlines and solid base create a timeless decorative piece that fits beautifully in modern,…
I modified the original and fantastic idea from wolffaayyy here on printables. I modified the sheet mount, so that it only has 2 Steelsheets instead of 3 (most of us will probably only have 2. Also a modified it with a better tray…
These TPU feet are designed to decouple the BedSlinger from other 3D printers on the same surface by absorbing vibrational energy, helping to minimize machine wear caused by vibrations. Benefits When you place a single printer on the…
Source .blend file is included, if you want to make some modifications😉 The edge isn't raised around the hole because of all the different grips people use. Classic painting palette with slightly raised edge to stop paint from dripping…
Adjustable GPU Anti-Sag Support (8-12 cm) – 3D Printable Model Protect your graphics card from sag with this adjustable GPU anti-sag bracket , designed for seamless 3D printing and smooth height adjustment . This model ensures your GPU…
This P1P frame includes slots for 16in x 12in x 3/8in acoustic panels to reduce sound and provide an affordable way to enclose the P1P. Designed to be cheap - no expensive fasteners, acrylic, or other extra hardware beyond small magnets…
Introducing the K1 Cable Chain Anti-Sag Riser Back — a specially modified Chain Link Riser Back component, designed to perfectly fit with the Creality K1 Cable Chain Sagging Fix by ViniS . This riser offers an improved solution to the…
Update: 26.03.2024: complete redesign! Based on the linked remix I have completely redesigned the model. It is now fully compatible even with Elegoo Neptune 3 / 4 Plus and Max. No supports are needed anymore! Compatibility Fully…
This is my new Anti-Gravity Roller! Yes, it is right in the name! The roller rolls against gravity (At least it seems to until you look close enough) If you liked this model, check out my other illusion model: THIS IS THE LINK This is…
This design is specifically aimed at reducing vibrations on the Y-axis, particularly the bed, which carries the most inertia and tends to resonate at higher harmonic frequencies. In my tests using Klipper and an ADXL345 sensor, I've been…
This is a stencil to create the sugar cross design the Almond Cake is famous for. The stencil is 10 inches tall so you would have to scale it within Cura to fit your cake pan. Additionally it has a raised area for easy removal after the…
This is the fourth of six ship models designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and to the Atlantis model by mere friction. Video about the project is here:
This is the first of six ship models designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and to the Atlantis model by mere friction. Video about the project is here:
Anti-Snoring Earbuds: a 3D printable solution for a better night's sleep. These earbuds are designed to fit comfortably and help reduce snoring, ensuring both you and your partner can enjoy undisturbed rest. Ideal for 3D printing…
This is the second of six ship models designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and to the Atlantis model by mere friction. Video about the project is here:
Replacement feet for Prusa Mini. I recommend using R5 for all feet! Also, be sure to increase the speed of infills from 80 to 90 mm/s as it's actually quieter (for me at least) with the higher speed. Revision log R1: Thinner ones R2:…
Cantilever Tool/Sewing Box Remix (PLA-Optimized, Modular Joints) This remix of the popular parametric cantilever box features a key modification for easier, faster printing and improved stability, especially for PLA users. Key Features of…
This mine is a continuation of the PMN mine series. It is similar in appearance to the PMN-2 mine. The main difference is the screw on the bottom of the mine, which can be used to adjust the self-destruct. The PMN-3 mine is NOT a…
anti-vibration feet for Flashforge adventurer 5M used default standard setting + auto tree support
socket adapters for mantis tool grid system keeps long sockets from rolling around by standing them on an angle
I designed this, because I really wanted one, but only had a small printer. (150x150x150) So I cut it into smaller pieces, and gave it a go! I used Acrylic brown paint, with a black wash. I think it turned out pretty Good!!
Technical background: Input Shaping on Klipper can be tuned with G-Sensor. When using a rooted Nebula Pad FW, the tuning produces the measured vibrations profile .csv and suggests shaper settings + max acceleration under these settings.…
Anti-vibration feet set for the prusa mk3s / mk3 Print instructions Anti-vibration feet set for the prusa mk3s / mk3
Paramêtres d'impression importants: Hauteur de couche: 0.25mm Largeur d'extrusion: 0.45mm Seam: Aligned Minimum travel after retraction: 0.1mm (SUPER IMPORTANT!!!)
We had problems with coffee grounds molding in the container of our coffee machine. There are other sieves out there, but they are all too loose or/and the grid is too wide, allowing coffee to fall through and also mold. If you're facing…
This is the sixth and final ship of the six ship models designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and to the Atlantis model by mere friction. Video about the…
A set of printable anti-tank obstacles with a little gothic twist. Four different levels of battle damage to mix things up. Perfect for 28mm or heroic scale wargaming. Dimensions: Height: 24mm Width: 22.8 mm / 24mm FDM friendly and…
This is the bonus ship designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and to the Atlantis model by mere friction. Video about the project is here:
UPDATE 2023-12-20: It appears I ended up uploading my modelling files instead of the models. If you downloaded .fcstd files, please download the new files. Sorry for the confusion! Uploading because the Dorformantik-Community has been…
Easily printable holder for Antilop legs Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 50 Filament: Spectrum PLA White Category: Other
This Centauri Carbon panel hinge set is an improvement over our original version. The most significant improvement is the drop-pin feature, which now enables the panel to be quickly and easily removed. Designed for a 7.5 mm spacer. Here's…
it's Bambulab P1P anti vibration feet adapter. Just print and adapt it.
I combined two very useful models into one comprehensive model. Many thanks to Alex Y and Hiart Printshop for sharing their models. I share only combined parts. Other parts necessary to build all model please download from original…
Antidust cap made for the USB input of the Anycubic Kobra S1 3D printer It is advised to also print this model : Kobra S1 Hepa filter
Print the caddy with support attaching the print base. The screws are available at Amazon, Ebay, Aliexpress, … They look all the same for me.
Verschiedene Hilfsmittel für das Brettspiel Dorfromantik
I printed from PLA and PETG. To save filament you can reduce the density of the filler to 5%. You will need external material to make it up. You need a wire (one that won't break when bent) that you attach to the underside of the liner…
Description 2 sizes - nozzle diameter 3.5cm (19 holes) and 5cm (37 holes) This watering cap is designed to fit commonly used PET bottles of various sizes. It also includes an Anti-Vacuum System (AVS) . Thanks to this, when you start…
Keep the environment dry by using this silica gel box. I remixed my previous "Click - Box" design, see: https://www.thingiverse.com/thing:2326019 UPDATE 1: like mentioned in the comments the previous version had some problems with slicing…
This is an over-engineered footrest for the very economical ikea antilop highchair. The collar parts compress the printed fingers against the legs to the footrest securely. Infinitely adjustable, the central joiner part allows the…
This is the fifth of six ship models design to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and to the Atlantis model by mere friction. Video about the project is here:
What's this? As seen in my FormD T1 v2.1 video , this anti-sag bracket secures the 4080 or 4090 Founders Edition stock air cooler and eliminates sag. Configurations supported: 3 slot 3.25 slot 3.25/3 slot (top strut in 3.25 slot + 5mm…
