Template for changing a Neutrik A-type cutout to D-type
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed to change a cutout for a Neutrik A-type outlet (22mm cutout) to a D-type cutout (24mm).
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 117
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
I needed to change a cutout for a Neutrik A-type outlet (22mm cutout) to a D-type cutout (24mm). For the main hole this is easy with a step drill, but the different position of the mounting screws is a bit messy, since they overlap with the old mounting holes. Be prepared to use a Dremel tool rather than a drill. So I made a template that centers on the 22mm hole (use this before drilling up to 24mm) and helps you mark the holes for the mounting screws.
I also included a little piece that shows the difference between A-type and D-type cutouts.