Template for changing a Neutrik A-type cutout to D-type
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed to change a cutout for a Neutrik A-type outlet (22mm cutout) to a D-type cutout (24mm).
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 28
- Makes
- 0
- Views
- 115
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
I needed to change a cutout for a Neutrik A-type outlet (22mm cutout) to a D-type cutout (24mm). For the main hole this is easy with a step drill, but the different position of the mounting screws is a bit messy, since they overlap with the old mounting holes. Be prepared to use a Dremel tool rather than a drill. So I made a template that centers on the 22mm hole (use this before drilling up to 24mm) and helps you mark the holes for the mounting screws.
I also included a little piece that shows the difference between A-type and D-type cutouts.