Counting matching models…
Modified cutout seals for the Python AMS Enclosure that have gasket groves and a TPU model for those gaskets. While this will technically improve the air-tightness of these seals, it is unlikely to make any functional difference in your…
I ran with 4 walls and 25% infill but I'm sure it would work with other variations.
This is a remix of the X-Axis Rollers Cover + Chain attachment + Lip https://www.thingiverse.com/thing:4357672
Scarecrow Halloween wall art. Print in parts main scarecrow piece then pick a number and a few sizes to print and place your bats.
From my video: Print with 0 top layers and 0 bottom layers and adjust the infill pattern and percentage for your desired mesh appearance. I STRONGLY advise against printing it solid since that thing struggles enough for air as it is. The…
Build a professional protective frame for your Raspberry Pi 5 with integrated 7" Touch Display 2 mounting. This horizontal mounting variant with top-side cutout for camera/connector access. Here we offer you the STL files for 3D-printed…
I wanted something which fits exactly in the cutout of the Dometic LS100 ventillation grille. As there is only little space between the cooling fins and the Ventilation grille at my caravan, I needed a solution for 15mm fans. While…
Build a professional protective frame for your Raspberry Pi 4 with integrated 7" Touch Display 2 mounting. This horizontal mounting variant with top-side cutout for camera/connector access. Here we offer you the STL files for 3D-printed…
With the help of the components for the Raspberry Pi 5" Touch Display 2 Frame Horizontal you can install the new Touch Display 2 from the Raspberry Pi Foundation in a picture frame-like housing. This version is made for the RaspberryPi 4.…
NOTE: This design is a tight fit on purpose - You may need to de-burr or sand down the inner edges of the circle to get the sensor to fit (purely because it needs to be a tight fit due to vibrations etc) A Vent cover for the AD5X/AD5M I…
DONE ✅ Custom sizes ✅ Drawable cutouts ✅ Straight or threaded screw holes ✅ Selectable screw hole locations ✅ Multiboard-compatible screw holes ✅ Specify dimensions in mm TODO Fill extra space Stacked printing <Suggest more in comments…
A 5 x 1 Gridfinity Cutout for the Xiaomi Precision Screwdriver set. The cutout is designed to keep the item upright to save space. It can be printed in 0.24 Draft settings, and the item will still sit perfectly inside. I designed a…
Plastic version of the cover for frosthaven Vanity storage made by NR This way you dont need a plex. Ive added some labels to simplify searching for all the monsters
I created a remix with a cutout from the bottom for easier removal or loading of the device.
Make sure to enable "detect thin walls"
Assembly requires Three M2 screws and nuts required ( 2 x 6mm and 1 x 8mm) if you would like them removable. Alternatively, use a toothpick as a ‘temporary positioning screw’ and glue in place. I recommend placing the nuts on Side B and…
The CYUL Apple ][ Floppy EMU case was near perfect — I just wanted to add a colorful Apple badge to the mix. I used Retro Platinium, Candy Apple Red , and Light Blue for the buttons. I don't have light pipes that work yet. (I'll get a…
This is a protective cover designed for the Mean Well LRS-100-5 power supply. It includes cutouts for an XT60 female panel connector and an IEC C14 (kettle-style) mains inlet, so the PSU can be integrated into a clean, enclosed setup with…
Updated to support standard PI hat standoffs and better threaded screw in support. Suggest doing a dry run screw test before assembling just to clear the threaded holes which makes it easier when you try to screw in with the case and hat…
Printed with 0.4 mm nozzle, nothing different then the main files except for being able to easily see the names, pictures also show where i added manual support with PrusaSlicer.
This is a custom Gridfinity cutout block designed to house the Alienware AW610M wireless gaming mouse. It keeps your mouse secure, organized, and ready to grab from your drawer or desktop grid. Two Versions Included I have designed two…
his 3D printable stencil is designed to make cutting openings for a standard 1-gang 3×2 electrical box quick, accurate, and repeatable. It’s a simple shop and job-site helper that removes guesswork and helps you get clean cutouts every…
This is a modified version of the original M5 Atom Echo mount. Added a cutout for the USB-C connector
Modification of the original G5 Ultra Turret spacer to allow pigtail storage + ethernet cable ingress/egress. Would recommend silicone to seal up the space around ethernet cable if there is a chance of moisture getting in. All credit to…
This model is compatible with the lego system.
Backplate with switch cutout for the MeshNRW Heltec T114 Case
Slight remix of Vern's model. I'm using Dryfiredude's ambidextrous slide racker and wanted the case insert to fit that in. Unintended benefit of the deeper cutouts is that now you can get a mag with extended baseplate to fit in the mag…
AD5X/AD5M Vent Cover With Cutout to suit 41mm Temp/Moisture Sensor off Aliexpress
This is a remix between two models, print at 20% infill with supports for the flat overhangs.
These are simple lids for FreeGrid boxes, featuring neat right-angle cutouts to be able to see into the box, which also make the lids easier to pick up. Contains 1x1 to 1x3 and 2x2 and 3x3 sizes. Other sizes can be made using the .fcstd…
Actual size is roughly 2.25" x 4.25" to account for fitting the outlet box, clips and/or any wires into the hole while still being covered by the outlet's faceplate
I'm using the I2C port on the D1 mini to connect to an Adafruit BME680. The BME680 uses a Stemma QT connector which has different wiring than the LOLIN D1 Mini I2C port, but I was able to move a few of the wires around using pinouts found…
This is an insert for an Apache 1800 Case that holds a 1001U amp and low voltage cutout. There is a path for running the speaker wires and the low voltage cutout case is removable for easy wiring. I attached a project from my slicer to…
A unique 3D printable creation — this Large Electronics Project Enclosure, Customizable Cutouts, Screw Lid, Durable Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print…
A unique 3D printable creation — this Large Electronics Project Enclosure, Customizable Cutouts, Screw Lid, Durable Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print…
This model is compatible with the lego system.
This is an addon to the Sovol SV08 Max 150mm ZZ Tophat Replacing the back right corner with a version without any hole. Made after a sugestion from Doug Walker A great care was made to be able to print without much support, so hopefully…
These are my personal modifications to Robert Samples' " Side mount dry box for Elegoo Centauri Carbon with hygrometer" I printed the box a total of 3 times trying different things in order to get a good airtight seal. The first time, I…
Ready to use when printed as just a sleeve and cap, or add a ring keychain and keep it on you at all times. Cap protects the plug and helps to push out the key without a keychain attached There is a small indent inside where the cap…
Templates for routing holes in decking so that electrical cords can be passed through. The hole size after routing with the recommended bit will be 10mm. Designed for a 1/4" diameter straight router bit. A cheap Ryobi bit worked fine. For…
There is a collision between the vent grille of the Prusa CORE One L and the Buddy3D camera. This is weird as the camera is shipped with the printer, it is not an accessory so it should have been broadly tested... Maybe a tolerance issue.…
The previous model didn't quite fit for me, so I modified it a little to make the cutout slightly bigger (wider), and I angled the bottom part to fit against the Board Cover/Splitter better.
Gridfinity cutout for 5x ESP32-POE-ISO, lazily built with the help of chatgpt.
Gridfinity cutout for Hilmor Wire Strippers petg, 15% infill, .28/.20 layer height designed using onshape: https://cad.onshape.com/documents/06a02534cc67ac6d8c02fed1/v/e0288b1be74a98f99e797fbc/e/2c2ea4a86df39c8fcaf5268b
petg, 15% infill, .28/.20 layer height Designed using onshape https://cad.onshape.com/documents/0417709435fc165e1ba95449/v/c1da94341eedf967e621d1b9/e/e5d966d023fe17eb66437c0d
This model is compatible with the lego system.
This model is compatible with the lego system.
I have an Unraid box that was getting really hot and needed a way to get another fan on the top panel. I will include the template and adapter itself. The template will help cut out a hole with a Dremel and drill to mount the shroud. I…
Had issues with the original model sliding around in the drawer I wanted to keep it in and didn't want any shelf liner (due to clippings getting stuck to it). I took prider's design (since I had already printed it) and made a shallow…
To suit Toyota Land cruiser 80 Series - Electric Mirror blank with rocker switch cutout to fit a generic or narva type switch. Category: Other
Remix of the ECAS04 by @3DCoded’s cutout model creates a flat surface on top. This reduces the overhang angle, and creates a flat top surface that bridging should print without any issues.
Stock footpad grip tape cutout shape, measured from TFL Grip Tape for V1/Plus/+XR
TFL Kush Hi footpad grip tape cutout shape, measured from TFL Grip Tape for V1/Plus/+XR
I made these MakerChips with a duck cutout that fit 15mm tall Baby Ducks STLs included: Single color blank chip 2-color blank chip Multi-color chip with "karenchaudesigns.com/ducks" text 3mf project file also included for blank variations…
An approximately 80mm diameter ring to accommodate a rolled up , wrapped, spiraled cord, rope, or string.
Flashforge Adventurer 5M Enclosure remix back right for spool holder cutout
Added a pip locking tab and M5 nut cutouts. Love the design!
Flashforge Adventurer 5M Enclosure remix top left for spool holder cutout
super easy print, i'm also posting the template i used (by Fantasial_395402) and some screws (by Antherias_316330) you can use but i used double sided tape on all angles. Print at 100% infill for a better result
Hi everyone. I am very proud of this one and it has a lot of features. I made this to be used with my Honeycomb Storage Wall setups. As such, whenever I make a model I will simply create it through OpenSCAD, put it into Orcaslicer, and…
No special print settings, I have printed approximately 40 of these for School… case works well with multiple students working on them.
Inspired by @MattBoyer but hand-created on my own, this is another variant of an American Flag inside of a cutout of the United States. This is perfect for a 4-color printer such as the Bambu AMS line. Included in the files are three…
I love printed mags. The sure.t mag by t4obrien is my favorite, it works great in most things. Unfortunately when I built a Crush I realized that the mag release cutout on basically every 3d printed mag differs pretty significantly from…
Makes perfect drywall, wood paneling or plywood cutouts with no measurements. Magnets align with each other through up to 5/8” thick paneling, (depending on strength of magnets used), thus eliminating error-prone measurements. This design…
i suggest printing this in tpu with a 0.2mm nozzle, use variable layer height at quality preset for the best results, your minimum layer height can be 0.06mm or less.
Remix of Ruger Picatinny rail by RustyNail The cutout allows to use stock iron sights without detaching the rail I also made it about 0.8mm higher There seem to be no good orientaion for printing this on FDM printer. Best ones seem to be:…
Watch the original build video: https://youtu.be/jKdu9TzRMRw Remixed these parts as part of a Lynx build I did. I wanted the extended butt, but I wanted it to be clean. The other half saw the cutouts in the print and asked if I could fill…
Simple Remix for bigger Watermeter (100mm), Lid-Cutout and another Cutout because of Water-Meter-Housing
I removed a section of the main body of the Galileo 2 extruder to allow bits of stuck filament to be more easily removed
Mikrotik RB5009 rack cover with cable cutout.
simply slide one into the other and let gravity do its job, has a cutout for the phone charging cord
box has a sliding lid I glued one part to the corresponding place to have a sample piece I plan to develop an improved version. Please feel free to leave me suggestions for improvements.
Remix of Thing Smart Lock 2.0 Cover small with thicker walls (to prevent the black lock shining through) and cutout for the battery compartment. Print Settings Printer: Anycubic Korba Neo Rafts: No **Supports:** No Resolution: 0.4…
Description Makes perfect drywall, wood paneling or plywood cutouts with no measurements. Magnets align with each other through up to 5/8” thick paneling, (depending on strength of magnets used), thus eliminating error-prone measurements.…
Scarecrow Halloween wall art. Print in parts main scarecrow piece then pick a number and a few sizes to print and place your bats.
Cutout style witch on a broom stick flying over the moon. Witch and Moon are seperate on this one but I was able to print them together on my printer with no issues. I'll be uploading an additional separate option soon tho. Thanks
This allows the mini console to be compatible with the Mister PI Taki Clone version. The holes isn't exact but it worked. All i did was add a cutout on the bottom so the Mister PI Taki Clone could sit flush and line up with all of the…
I designed these to do a workshop re wire that required the use of plastic back boxes along a benched workspaces. A lot of back boxes of this type do not have 20mm knock outs in them and as I also like to use 20 mm nut and flange fittings…
Spooky Ghost w/ multiple faces Halloween Wall Art Cutout with 4 diff faces/mouths to choose from. Simply attach to your wall with some sticky tack!
18s2p battery box for xr. fits an xlite v4-32. included a printable bumper that fits this box.
Frankenstein Head Wall Art Cutout print and place on the wall with a little sticky tack
Different take on CANbus cable strain relief using PG7 Gland. Intended for newer BTT Toolhead boards with thicker connector. For those who want lower and centered mount with a cutout for the cable/screw in portion. Make sure to route the…
The iPhone 16 / Pros come with the handy new Camera Control feature. While a lot of people like / love it, I don't. I'm kind of an old school guy. I realized I use it mostly as a button to open the camera app itself. Moreover, the case…
I have done a fair bit of home remodeling, and I have had a few instances where I wanted to put an outlet or switch located closely to something else. I threw this template together a few years ago to make locating the boxes with a cover…
Fits a single M18 Milwaukee battery. Single screw mount. Planning on creating a second version enlisting two screw holes to limit possibility of twisting.
As above, this is a grommet (cable guide) for a mountain bike shift / dropper cable for insertion into a 8x16mm slotted frame cutout hole. I used this for retrofitting a new internally routed dropper post to a Trek Marlin 7. The frame…
With Prusa's new rewards system, if you like this model, PLEASE click the like button Print with supports, should only need them between the body inner and the overhang rail.
Modified case top and bottom with 5v and ground GPIO pins cuts to power my LED light. Print List Top (pizero2casebottom) Bottom (pizero2casetop) 2 clips (Clip_wire_interlock) Parts Needed 4x M2.5 screws
A very minor remix of the removable bin by fonzy to allow use of the nozzle -cleaning brush mount by cloudyb The cutout goes to the mount so the mount does not interfere with the automatic bed homing Additional - Remixed a model to extend…
I've printed these with some generic PLA (white) and was able to churn out a half-dozen of them fairly quickly in the “upright” position, the same orientation as the close-up photos. I didn’t have enough "strong-enough" magnets to use…
better cutout to see the battery status indicator. (bigger than on the image, did not print out the latest version yet)
Added a cutout for fingers to pull out the EIBOS3D vacuum pump more easily.
An ESP32 C3 Supermini case that has pin cutouts so you can use breadboard wires.
![Apple ][ + Floppy Emu with Apple Badge Cutout](https://media.printables.com/media/prints/f1c5d791-ab80-47a5-a3c9-1058ac380797/images/12110393_aa0136aa-4188-4bfc-b4f4-5b3c0d25124c_8adda14c-7ec0-44e8-aced-1619e97fdecd/img_7430.jpeg)
![[v2] Yubico YubiKey 5C NFC Sleeve Case /w Keychain Cutout](https://media.printables.com/media/prints/ada12126-7fd3-4773-bce8-b934bd1658b4/images/12905239_0e10af11-f139-48f1-aa66-752728d39124_6760a662-d207-4a87-9abd-f1c42234d988/thumbnail3.png)
