1 / 3
Voron V2.4 PG7 Umbilical & Y Endstop Relocation with cable cutout - REMIX
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Quick remix adding 1.1mm, 2mm, and 5mm cable cutouts to make it easier to feed canbus wires into the endstop plate
- Rating
- 5 / 5
- Likes
- 105
- Downloads
- 1,407
- Makes
- 13
- Views
- 5,575
- Reviews
- 10
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution
If you have an umbilical that goes all the way from the toolhead to the electronics bay and can't be bothered to redo the wire path, these cable cutouts let you just slip the existing wires into the endstop relocation mount. I've attached a 1.1mm version for diy cables using up to 20awg silicone insulated wire, 2mm cutout for 18awg silicone wires and a 5mm version for those using the thicker premade wires from BTT or chainflex etc.
Use two M3x8mm SHCS for attaching it to the A-Drive.