Modular Filament Storage System - Small Spool Version - 250g (No screw holes)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model is fully compatible with AWT Works Modular Filament Storage System. It uses the Filament Rod from their page.
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 154
- Wydruki
- 1
- Wyświetlenia
- 952
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is sized to fit 250 G spools of filament. It can stack on top of the original storage system and uses the same Filament rod. I did not include the screw holes that the original had.
UPDATE: I have added a version with screw holes compatible with the original model. I have not test printed this update myself but it should be precise.
Printing Notes
The design prioritizes strength and rigidity rather than minimal print time.
Recommended starting point:
0.2mm layer height
4 perimeters
15-20% infill (Gyroid or cubic)
5mm brim with distance from part of .15 mm recommended.
No other supports required
Adjust settings as needed based on material and printer.