Modular Filament Storage System - Small Spool Version - 250g (No screw holes)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model is fully compatible with AWT Works Modular Filament Storage System. It uses the Filament Rod from their page.
- Rating
- 5 / 5
- Likes
- 27
- Downloads
- 154
- Makes
- 1
- Views
- 952
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is sized to fit 250 G spools of filament. It can stack on top of the original storage system and uses the same Filament rod. I did not include the screw holes that the original had.
UPDATE: I have added a version with screw holes compatible with the original model. I have not test printed this update myself but it should be precise.
Printing Notes
The design prioritizes strength and rigidity rather than minimal print time.
Recommended starting point:
0.2mm layer height
4 perimeters
15-20% infill (Gyroid or cubic)
5mm brim with distance from part of .15 mm recommended.
No other supports required
Adjust settings as needed based on material and printer.