Phone chargers organizer shelf
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small shelf to organize 3 phone chargers and respective cables.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 53
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple model I made to organize around three phone chargers (large block of 42mm x 29mm footprint) and cables. Can be used of course for general purpose too. Attached to any surface with double-sided adhesive tape.
It is a very simple design and can certainly get better (eg a fillet around the base of each cable holding protrusion could make them much more sturdy).
Printed it with 0.28mm Fast printing settings, with a 0.6 nozzle and standard PLA with 20% infill and Organic support to the bed for the protrusions only.
If you find the design useful, please like and if you use it remember to mention me.
For for your own personal use but NOT available for commercial use.