Sailmaking Blocks for RC sailboats
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a set of sailmaking blocks based on Swede Johnson's designs.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 140
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a set of sailmaking blocks based on Swede Johnson's designs. I have several formats available, even a photocopy of the original drawings and instructions. I have his original drawings, but using modern CAD software, I faired his curve properly and provide a new set of dimensions. The 3D STEP and STL files are based on that faired line.
I have a build thread with more information and instructions, including other techniques on rcgroups.com. https://www.rcgroups.com/forums/showthread.php?4703993-Tales-of-Wind-and-Strand-Rigging-and-Sails-in-6-998-Easy-Steps
There are two blocks. One is a 24-inch 5º angle block and the file name is obvious in the files list. The other is an 18-inch 3º angle block and the original files were dated 1983, so look for the "1983" names in files list.
STL- files ready to 3D print and glue
STP- This a very basic 3D file of the block. It is for modification, such customizing for your printer or adding features.
DXF- 2D drawings for CAD use.
PDF- 2D drawing for paper printing.
PDF- The original drawings and instructions
Update- I added a 4 degree bevel STL version of the 1983 block.
Category: R/C Vehicles