Wera Joker 6003 15 piece Spanner mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two piece Spanner mount designed for the Wera Joker 15 piece spanner set with numerals from 5.5mm to 19mm
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 19
- Wydruki
- 1
- Wyświetlenia
- 134
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Two piece Spanner mount designed for the Wera Joker 15 piece 6003 spanner set with numerals from 5.5mm to 19mm
I printed these on a Mk3.5S with a .25 head, if I had a .15 I'd be keen to use that, as the smaller text would benefit from a smaller printing head.
I used 4 perimeters with 3D honeycomb infill, use your own judgement as you know what works with your printer.
Filament that I used was Sunlu Green in PTEG and PTEG Black for the text
Screw holes are designed for 6 and 7 Gauge screws.
These are around 250mm long, so just move them diagonally 40-45 degrees to fit on a smaller bed.
If you don't want the txt, just use the slicer to stop before the txt and this way you can hang the spanners in a different direction if needed.