Wera Joker 6003 15 piece Spanner mounts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two piece Spanner mount designed for the Wera Joker 15 piece spanner set with numerals from 5.5mm to 19mm
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 19
- Makes
- 1
- Views
- 134
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Two piece Spanner mount designed for the Wera Joker 15 piece 6003 spanner set with numerals from 5.5mm to 19mm
I printed these on a Mk3.5S with a .25 head, if I had a .15 I'd be keen to use that, as the smaller text would benefit from a smaller printing head.
I used 4 perimeters with 3D honeycomb infill, use your own judgement as you know what works with your printer.
Filament that I used was Sunlu Green in PTEG and PTEG Black for the text
Screw holes are designed for 6 and 7 Gauge screws.
These are around 250mm long, so just move them diagonally 40-45 degrees to fit on a smaller bed.
If you don't want the txt, just use the slicer to stop before the txt and this way you can hang the spanners in a different direction if needed.