Skateboard wall mount with optional LED wireless backlight
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed it to be cooler
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 334
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Share Alike
These wall mounts allow for skateboard mounting on any wall
Option for LED backlight (3-pack was available at Costco) to use as backlight/indirect lighting, these can be activated by motion or remote control and are USB-C rechargeable
Use black electrical tape to cover unused mounting holes to prevent light from shining through
I used M6 x 12mm socket cap head screws in black which provided enough bite but don't show through to the outside
Top low and top high should be printed on their side, with supports
Top low may be desirable for boards that have more of a curve at the top
Wall bracket and bottom brackets don't need supports
PETG, 4-wall, suggested for strength