Liczymy pasujące modele…
A customizable DIY macro keyboard with RGB backlight and USB C, which uses cherry mx keys. Features RGB backlight Fully customizable Compatible with all cherry mx keycaps USB C Simple assembly Cover for transport included No supports…
Note: I added a customizable OpenSCAD file for the round keycaps. This is my first ever attempt at OpenSCAD, so there are probably some bugs and until now no input checks. I have also a hard time naming variables, so they are not all…
Update: This was the final version. Good balance and ability to deal with multiple badge holder types. Threading the wires is still difficult, BUT very reliable. Thread them through and bend them around to get a good contact. This is a…
This parts are intended to be used as replacement for the dummy parts on the ActionBikes brand, Willis Jeep. The retroreflector parts have to be covered with retro reflective material. The Backlight can be fitted with LED lights. You are…
After building the TWP with 6x6x9 microswitches, I wanted to redesign the ICP along the same lines, using the microswitch's central pin as a support for the button itself, backlighting with LEDs, and using a 2.54-pitch multi-hole…
I wanted to backlight my 50cm round bathroom mirror and needed a frame that lets me attach LED strips all around it perfectly. With existing electrical wiring behind the mirror, this quarter-circle frame (print 4x to complete the 45cm…
31/03-2026 - Added a V2 model with 3 top layers for using another filament and updated print instructions. A simple model to check how my other panels will look with theese settings. The size is the height of the text, as entered in F360.…
This is a Mount for the Goove TV Backlight 3 Lite Its for the TCL Q7C, 50 Inch, but i think it should also fit bigger versions. Just a bit of support needed for printing and a bit of double-sided tape to fix it in place on the TV.
My Govee TV Backlight 3 camera somehow was knocked off the TV and the counterweight hinge broke. This bracket holds it on top of my LG C4 TV. The fit is not 100% perfect, the angles of the flat part on the bottom and the camera shaft…
Lowe HF150 LCD Backlight Diffuser This is a diffuser for illuminating the LCD on a Lowe HF-150 receiver. There is space for 2x3mm LEDs, one each end. I used two green LEDs in series with a dropper resistor powered the VBAT line. I printed…
LED used (click) on Temu. LED Alternativ Link on Pearl Germany LED Alterniv link on Aliexpress Beatifull Design from evax design . You can find the original HERE . A wonderfull christmas decoration with different mount options. This…
Completely redesigned this cloud lamp around a “6.56ft Govee RGBIC Strip Light 2 Pro with Matter” light strip. Expensive, but I wanted the brightness and addressable LEDs. Requires gluing the face pieces and optional m4 knurled threaded…
Vesa mount for Govee TV backlight 3 lite. Used M8 (28 mm long) bolt to fix into the TV.
Lamp for mounting to T-slot. I recommend to use ABS for printing body and bracketsc not printed parts: 2x M3x8 screw 2x M3x6 screw 2x M3 Heating insert 2х M3 T-nut led strip or modules
Govee LED TV EYE Backlight Stand for Slim TVs. Secure mount, no backlight obstruction. small amount of double sided tape and goes over the lights and stays secure. Printed in PLA at 25% infill on its side long ways up, no supports came…
Seen the original model but it was not made to fit around the original displate offset mount. I bought this already in the past and had it installed on the wall already. Made it so it easy slides around and holds the LED strip. Made the…
Captain America's shield, with a back cutout for light up wings. The shield comes in sections so you can print in different colors. This model requires an LED light for the light up wings. It is best to use a single LED module, so that…
Holders for LED strip (Dual-line LED's) Print Settings Printer Brand: Anycubic Printer: Kossel **Rafts:** No Supports: No **Resolution:** 0.2 Infill: 20 **Filament:** Unknown PLA Black Category: 3D Printer Accessories
For assembly you need a m4 10mm screw and a small piece of fiber. I recommend printing the LED strip holder from a heat-resistant material, because the LED strip is sometimes too hot. Other can be PLA. 0.4 0.24
Der Halter passt perfekt an der Strebe vom Larry vs Harry Bullitt Lastenrad. Innen kann ein Gummi (20x10x1mm) zur Rutschhemmung installiert werden. The holder fits perfectly for the Larry vs Harry Bullitt cargobike. A rubber band…
This is a mount for mounting LED strip to a IKEA Lindbyn oval (60 x 120 cm) mirror. The spacers allow for more stability when mounted on the wall. They are pretty much a must have and they also provide some space for the power supply,…
This is a project that I worked on with my kids for Mother's Day but it is applicable to any picture that you would like to turn into a lithophane. It is composed of 4 parts…the lithophane itself, the box, the lid/bottom for the box and a…
On the Prusa Core One you can turn off the chamber lights and the status bar but you cannot tun off the LCD display backlight. This modification changes this by using a simple switch. The modification requires you to solder on the display…
- replaces rubber damper between fender and backlight - slicer: Cura - printing material: Generic TPU Nozzle 228°C, Bed 0° - printing orientation: flat with support
This adapter works with the “Game Boy Advance SP 3.0 Inch IPS LCD Backlight Kit M2 - FunnyPlaying” from handheldlegend.com. https://handheldlegend.com/products/3-0-laminated-ips-kit-for-gba-sp (INCLUDES) - Top and Bottom Brackets so LCD…
Clamp for a Decathlon btwin usb backlight with unkonw part number. You would need rubber bands to attach the light. Printed with supports.
If you own one of these stoves you know. The backlights on the knobs don't need to be this bright. These will block most of the light but still glow to let you know a burner is on.
These spacers are to help center the LCD for the new backlight kit from China with the touch sensor backlight control. I refer to this kit as "AIO" and it can be found here: https://www.aliexpress.com/item/4000277929265.html I made a…
I designed two versions of a bracket for the NGPC backlight kit (AIO V1). These brackets will allow you to install the kit dead center with ease. Just print (as is) either v1 OR both "a" and "b" files of v2 (you need both or the screen…
FS_Spacers should work on any Freckleshack style screen that does not use the PCB for locating the LCD within the shell. Specifically this means Freckleshack or the new backlight kit from China with the touch sensor backlight control.…
Can be printed in nearly any material. I recommend dark colors or a color that otherwise matches your existing bezel. Requires small nozzle but I was able to print just fine with PETG on a .4mm nozzle. YMMV Works better with OEM screen…
This is simple Galactic Empire Logo with recess for lighting. I didn't find what I need and make it. There is a hole for wires at the bottom of the logo. The file mount is designed for a tight fit with an 11mm hole. I'm used WS2811B 1…
This Print houses an Node32s Microcontroller, USB-C Breakout Board, 8 Pixel Neopixel (WS2812B) Ring and holds an Lithophane. You can programm the Node32s to light up the Neopixel Ring in any color and do animations. If you have a home…
install led strip light and put lithophanes or solid clear filament pane for flat 3d printed wall art
Vanmoof s2 smart backlight replacement. need to add an led plate yourself.
Replacement Part, Ersatzteil Cover Cap for Punto 188 Backlight, Abdeckkappe für Punto 188 Rücklichthalterung Printer: Own Build: ndl V3 Rafts: Doesn't Matter Supports: no Resolution: 0.2 mm Infill: 30% Filament: Generic ABS or PETG Notes:…
This parts are intended to be used as replacement for the dummy parts on the ActionBikes brand, Willis Jeep. The retroreflector parts have to be covered with retro reflective material. The Backlight can be fitted with LED lights. You are…
These wall mounts allow for skateboard mounting on any wall Option for LED backlight (3-pack was available at Costco) to use as backlight/indirect lighting, these can be activated by motion or remote control and are USB-C rechargeable Use…
After building the TWP with 6x6x9 microswitches, I wanted to redesign the ICP along the same lines, using the microswitch's central pin as a support for the button itself, backlighting with LEDs, and using a 2.54-pitch multi-hole…
I wanted to backlight my 50cm round bathroom mirror and needed a frame that lets me attach LED strips all around it perfectly. With existing electrical wiring behind the mirror, this quarter-circle frame (print 4x to complete the 45cm…
31/03-2026 - Added a V2 model with 3 top layers for using another filament and updated print instructions. A simple model to check how my other panels will look with theese settings. The size is the height of the text, as entered in F360.…
This is a Mount for the Goove TV Backlight 3 Lite Its for the TCL Q7C, 50 Inch, but i think it should also fit bigger versions. Just a bit of support needed for printing and a bit of double-sided tape to fix it in place on the TV.
My Govee TV Backlight 3 camera somehow was knocked off the TV and the counterweight hinge broke. This bracket holds it on top of my LG C4 TV. The fit is not 100% perfect, the angles of the flat part on the bottom and the camera shaft…
Lowe HF150 LCD Backlight Diffuser This is a diffuser for illuminating the LCD on a Lowe HF-150 receiver. There is space for 2x3mm LEDs, one each end. I used two green LEDs in series with a dropper resistor powered the VBAT line. I printed…
Rose Backroad D-Shape Seatpost SP-Connect Backlight Adapter Snap On Print in PETG, ABS, ASA No PLA - to britle No TPU - to soft I did mine in PETG Infill 35-50% - Cubik Snap it on, pinch the Sides tight, connect the backlight, you good to…
Simple E14 socket holder for VESA mount. I used smart lights and connected them directly to the wall to use as monitor backlights. Can be screwed in the wesa mount using one of the screws in any corner.
Backlight for Medium Displates Description: This 3D-printable project adds a fully customizable LED backlight to your medium-sized Displates, powered by an ESP32 running WLED. The design is modular, easy to assemble, and ideal for setups…
This kit enables you to use a 4-LED piece of 144 LEDs/m WS2812 strip as a backlight on your Apex. You can solder the wires on the back, pointing inwards and tuck them away in the provided cable channel. Make sure to secure it with some…
🟦 Full Description This project is a DIY customizable wall lamp , perfect for makers who want a unique decorative piece with a modern illuminated touch. You can design your own front plate (text, logo, silhouette, symbol, etc.), print the…
simple backlights replacements for little tikes cozy coupe, can be attached using screws or plastic fasteners. you can modify this to add custom stickers but I liked the raw look
This is a Mod for the EVGA powerlink adapter. it will require some cutting of the orginal plastic and you will have to do some soldering to the 12v rail inside to supply power for the led's, recommended to put aluminum foil on the back to…
This is a lamp holder to backlight a lithophane. I purchased the Strala cord set and needed something to hold it behind the lithophane. I decided to invert the light bulb in order to get the light to fully illuminate the lithophane…
Simple and easy to print housing for an airtag for hidden mounting on a bike. It uses the usually free space on the rear light attachment. We have several bikes and the distance of the 5mm screw bolts of the taillights always measures…
This houses 4x lithophanes, each one should be 100mm x 100mm x 4mm. They are sandwiches between the 2 halves, and you use M3 screws to hold it together. The backlight plan was designed for a 1m LED strip - this wraps around the center…
repair support for SigmaSport backLight Category: Replacement Parts
A simple generic rectangular bracket (OpenSCAD customizable) . I use it to mount a Govee WiFi LED TV Backlight camera on top of a LG OLED TV which is much too thin to mount the camera as originally intended. The scad file can easily be…
While repairing the backlight of my LG TV, I broke the standoffs / clips that hold the light diffuser foil away from the LEDs. I threw together a quick replacement in OpenSCAD. TV model is a LG 42LN5708. May fit other models aswell.
The existing backlight of bike helmet “Abus Urban-I 3.0” eats CR2032 batteries like cereals at breakfast. So I designed a ne adapter for my “ Büchel Micro Lens ST ” which can be recharged by USB. Supports just needed for the top slide.
Due to the war in my homeland, millions of Ukrainians are left without electricity. I made a circuit that can be powered by any batteries and is 15% more efficient than 5/12v LED strips. The design of the flashlight can be arbitrary, but…
I printed the Mini Playboard by 3DyPrinterGuy with a black background. It makes it a little difficult to read. I decided to use an LED string to backlight the play mats.
I designed this backlight mount for the Busch & Mueller Line Small. It can be attached to the bike rack screws on the back of my cargo bike. This ist the "NEW" version with embedded Nuts and overall a little bit thicker. Print…
Flow indicators were badly visible since heating is 10+ years old. Needed some backlight. Suitable for white LEDs Ø3mm. Just use an appropriate voltage (battery, accu, power supply unit) and bring light into your heating system. TinkerCad…
Mount for a small battery led backlight under your bikes saddle
This is a solar charging and automatically switched backlight for your lithopanes. All non-printed components are repurposed from inexpensive lawn/garden solar lights (pack of 4 is $9.99). This is a super easy re-purpose. Small amounts of…
Christmas Advent Calender I made this Christmas Advent Calender for my kids. You will have to glue the stairs together. Each stair step stands for one day. If Santa reaches the tree its Christmas Eve. Glue the "Stairs_Wood_Connector" on a…
Had someone ask me to build a Simpsons TV but larger than ones already online. So after some searching I found the 3.5 inch version to be best for my needs and scaled it all up to 1.712 then added some brackets to the front face to fit…
This is a mount that allows attaching of a backlight onto the ACID Gravel Carrier . The mount itself is fastened using cable ties, as shown in the pictures. The uploaded version is one centimeter shorter than the version shown in the…
I needed a mounting solution for a Büchel LED e bike backlight and this is what I came up with. Printed mine from black Das Filament PETG. Useable for saddle posts with 27mm diameter and LED backlights with minimum 48mm screw post…
Instead of having the T2 camera sit on top of the TV this stand helps to position the camera in a good position in front
Just made a replacement strap for my vancouver backlight. It was broken. Probably brittle due to the sun. The replacement part need to be printed in TPU. TPU is kinda picky. It can be a challenge to get a usable result. If you have a…
I didn't have enough backlight when printing on my Tronxy X1 and I designed this holder for the hotend. This addition is simple and practical, does not require additional fasteners. I used one piece of a standard 50 mm LED strip (there…
Remixed VicPucky's model to use magnets for easy removal of the Govee TV Immersion LED's. Magnets are from Harbor Freight and simply super glued in place. I did use 3M Extreme double sided tape to mount the blocks. Links to each below.…
Make artillery great again!! Ich habe hier für euch eine kleine Auswahl an Extruder Hüllen. Diese haben Luftschlitze für eine bessere Wärmeabfuhr. Das Origianlgehäuse wird bei langen Drucken sehr warm (>50°C). Hier gibt es innen mehr…
My olde rubber attachments for the rear light were worn down, and the back light started to shake. So, I came up with a replacement printed from TPU. It works best if you put the old rubber part around the TPU part to dampen vibrations…
4 LEDs 3mm 3volt. A board that lowers the voltage from 24V to 12V is not needed!! A resistor of 560 Ohm or 680 Ohm, 0.25 W is sufficient Power it from the hotend fan connector. It turns on automatically when the temperature exceeds 50…
Printer: Anycubic Vyper Rafts: No Layer Height: 0.16 Infil: 20% Supports: No Filament: PLA Rotate model so that the top surface is on the build plate. Use thick double sided tape to secure in place.
I split the models into parts in slicer. The shadowbox does take some time to clean out the channels for the inserts. 10mm led strip lights fit nicely into the shadowbox.
A Nintendo 64 Cartridge Holder with possibility to add a backlight (WS2812 strip) You can check my illuminated logo here https://www.printables.com/model/701923
I've designed a STAR TREK sign from the 70s that is soon getting enhanced with other more atmospheric backlighting. The quest for the perfect light diffusion and layer thickness took a while, but I'm proud to present two projects with…
Print using TPU. The elasticity depends on material and infill. No post processing needed.
A backlight monitor frame for LED stipes. Can be mounted onto an 100x100 Vesa mount and is made for an 24inch monitor.
A light i can slide around the vertical part of the stand of my Dell G2724D monitor. I used 7 screws (TCHC M3x20) and inserts to join the two halves and then glued a 12v led ribbon. The file Stand_G2724D.stl is downloadable in case…
I used the standard settings for PLA 0.2mm (Speed) → about 50 minutes
You created a nice 3d lithophane and need a backlight for it? Use this LED PUK backlight stand for LED lights up to 75cm/29,5 inch diameter and 3cm/1,18 inch thickness. Printed with supports in PETG on a MK4. You can find the LED Puk here…
This is the most amazing and beautiful decoration for the interior. The dimensions of the tree are 1037mm x 1531mm. I used an RGB LED strip with WIFI control. In order to print all the parts, you will need a printer with a heating bed of…
This is an adapter to fix a Busch+Müller Toplight plus back light to the luggage rack of a newer bike. Actually I do not need the light, only the reflector. The original back light of the bike does not have one, the reflector is fixed…
This is for the really cheap "Walfort Multifunktionale Beleuchtung" from Action https://www.action.com/de-de/p/3007645/walfort-multifunktionale-beleuchtung/ Thanks to @faltypi for the mention. The light can shine white and red (the…
small and simple clip for bicycle backlight from decathlon https://www.decathlon.cz/p/predni-a-zadni-svetlo-na-kolo-st920-usb/_/R-p-313171?mc=8576352
This is a mount to use a LED strip as a backlight for your Displate. Additional Parts To build the backlight, like in the pictures, you need: Ws2812b LED strip (can be a different one, if you prefer another) ESP32 running WLED (see WLED…
Print with flexible filament like TPU. I tested the version for the 27.2mm seat posts, the 31.6mm version is just an educated guess. But the design is parametric:…
If your headband torch batteries are dead you can use your phone attached with Light beamer to enhance the beam of light produced by your phone backlight source. The inside of a beamer must be covered with reflective materials such as…
