Airbus Style Text & Backlight Test Badge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Test badge to see how the panels will look with an LED and settings.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 92
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
31/03-2026 - Added a V2 model with 3 top layers for using another filament and updated print instructions.
A simple model to check how my other panels will look with theese settings. The size is the height of the text, as entered in F360.
Print Instructions:
NOTE: Make sure in the filaments tab that the transparent filament is the first color or else the infill will merge in your object. Remove and add the blue filament if it still doesn't work.
The top panel isprinted with 0.2 for better quality on text.
I use three different PLA filaments to acheive the top panels with the text and LED backligtning. Blue, I use Polyterras Muted Blue PLA filament. White, I use a standard white filament, nothing to specific. Transparent, I use FormFuturas "easy fil PLA natural" but any transparent filament works. The more see throught the more light will shine through.
The transparent filament makes the "blocks" with text on top which sit inside of the top panel to spread/diffuse the light to a larger area. The last layers on top is a seperate 0.3mm (3 layer) thick object which should be printed in the white filament so that you don't see the infill or previous layers through the text and it makes it look overall better.
When importing do not scale to millimeters and load as a single object with multiple parts. Top Panel objects should be printed in blue, transparent in transparent and the rest of the bodies in white.
Ironing Type - Topmost surface only on the top panel
Infill type - Rectilinear
Infill density - 100% for 0.2 nozzle (10% for transparent bodies)
Layer height - 0.1
Make sure the ironing pattern goes from left to right of the panel, side to side. Orient it in the correct way and make sure all panels are oriented the same way. If you use OrcaSlicer or similar you can change the ironing angle.