1 / 1
Pro Acryl Paint Bottle Holders for IKEA SKADIS — zdjęcie 1

Pro Acryl Paint Bottle Holders for IKEA SKADIS

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix that spaces the Pro Acryl Paint bottles evenly horizontally and vertically on an Ikea Skadis

Ocena
0 / 5
Polubienia
4
Pobrania
50
Wydruki
0
Wyświetlenia
493
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A modular, space-efficient storage solution for Monument Hobbies Pro Acryl paints, designed for IKEA SKÅDIS pegboards.

This design is a remix of Zenoku's Pro Acryl Paint Pot Holders, with improvements to spacing, alignment, and paint organization.

What's Different?

Seamless Modular Layout

The original design didn't align perfectly when multiple holders were installed together, leaving unnecessary gaps.

I redesigned the spacing so the holders nest together uniformly, both horizontally and vertically. This allows you to maximize the available pegboard space while maintaining a clean, consistent appearance, regardless of how many holders you install.

Color-Coded Organization

Each holder consists of two pieces that are glued together after printing.

While a single-piece design would be more convenient, the two-piece construction offers an advantage: you can print the bottom layers in different filament colors to designate specific paint families.

When printing at a 0.2 mm layer height, print layers 1–11 in your chosen color and switch to white at layer 12.

For example, I used red for the bottom layers of my red paint holders and white for the remainder. This creates a subtle color-coded base that makes it easy to identify where each paint belongs when I'm finished using it.

It's particularly useful when organizing a large paint collection.

Improved Label Visibility

The front cutout has been lowered to make the paint names easier to read while the bottles are stored.

Printing and Assembly

  • Layer height: 0.2 mm

  • Color coding: Print layers 1–11 in your chosen color, then switch filament at layer 12.

  • Assembly: Print both components and glue them together.

  • Modularity: Each unit holds three bottles. Print as many units as needed to expand your storage.

Installation

To achieve the seamless alignment, the order in which you install the holders matters.

  1. Start with the bottom-right holder.

  2. Work toward the left until the bottom row is complete.

  3. Move up one row, starting again from the right.

  4. Continue working left and upward until all holders are installed.

Following this sequence ensures the holders nest together properly without unnecessary gaps.

Design Background

This remix builds on the original design by Zenoku on Printables.

I wanted a storage system that made better use of the available SKÅDIS pegboard space while also making it easier to organize and return paints to their proper locations.

The result is a modular system that combines efficient spacing, consistent alignment, and color-coded organization.

For additional photos, a closer look at the design process, and more details about the improvements, check out the full project article on my blog, Denominator Designs.

Making Better Use of IKEA SKADIS: A Modular Pro Acryl Paint Holder

Tagi