1 / 5
TP-Link 1U rackmount housing for OC200 and TL-SG1005P
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1U rackmount adapter for TP-Link OC200 Omada Cloud Controller and TP-Link TL-SG10 PoE switch.
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 555
- Wydruki
- 2
- Wyświetlenia
- 5250
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (2)Kolekcje (64)Powiązane
Description
This is a 1U rackmount adapter that allows you to rack-mount a TP-Link OC200 Omada Cloud Controller side-by-side with a TP-Link TL-SG1005P 5-port PoE switch.
Parts Required
This adapter is split into two pieces so that it fits on a standard print bed. To join the two halves together, you will need:
- 2x M4 hex nuts
- 2x M4-12 cap head screws
Print Instructions
The assembly in the pictures was printed at the following settings:
- Printer: Prusa i3 MK3S
- Print Settings
- 0.2mm layer height
- 3 shells sides
- 5 shells top and bottom
- 15% infill
- Filament: PolyTerra Charcoal Black PLA
- Supports: none
- Brim: none
Assembly Instructions
- Print both halves of the assembly with the faceplates pointing down into your print bed. Use a satin-finish print bed if you're trying to match the powdercoat of your rack.
- Print 2 backstops - they are keyed to fit into the rear of each shelf. Secure them with glue if you want, however friction keeps mine in-place just fine.
- Use two M4-12 bolts and nuts to join both halves of the assembly together.
- Mount empty assembly in your rack.
- NOTE: the Omada Controller and PoE switch slide in from the front but ARE NOT MECHANICALLY SECURED into the assembly. Add some double-sided tape on each shelf if you want to secure them in-place.
- Enjoy your sweet rack-mounted network appliances!
Updates
- 2022-07-15: By request, added blank left & right panels in case you only need 1 network appliance instead of 2.