1 / 3
Prusa MK3s Print Boundary Check (Slicer vs Actual Print) — zdjęcie 1
1 / 3

Prusa MK3s Print Boundary Check (Slicer vs Actual Print)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Print this to see how accurately your printer depicts your print bed

Ocena
0 / 5
Polubienia
3
Pobrania
18
Wydruki
1
Wyświetlenia
320
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Print this on your MK3 to see how accurately your slicer matches your print bed. 

This prints (4) 10mm x 10mm x .4mm squares at the extreme of the 250x210 print area to check how it lines up on the actual print bed.

I put images of my slicer and my actual print.  I need to move this -2.3mm on my x-axis and +4.5mm on my y axis. My MK3s is assembled correctly.  I verified that my removable sheet was centered correctly on the heated bed.  I'm curious how I can correct this shift.  I needed to print something 250mm wide and had to omit the skirt→ loops as they would have printed in thin air on the right side.

Tagi