Prusa MK3s Print Boundary Check (Slicer vs Actual Print)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Print this to see how accurately your printer depicts your print bed
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 18
- Makes
- 1
- Views
- 320
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Print this on your MK3 to see how accurately your slicer matches your print bed.
This prints (4) 10mm x 10mm x .4mm squares at the extreme of the 250x210 print area to check how it lines up on the actual print bed.
I put images of my slicer and my actual print. I need to move this -2.3mm on my x-axis and +4.5mm on my y axis. My MK3s is assembled correctly. I verified that my removable sheet was centered correctly on the heated bed. I'm curious how I can correct this shift. I needed to print something 250mm wide and had to omit the skirt→ loops as they would have printed in thin air on the right side.