RAK 1 Watt Kit Mounting Plates
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting plates for the RAK 1 Watt kit with the 19007 board and 13302 module.
- Ocena
- 5 / 5
- Polubienia
- 45
- Pobrania
- 406
- Wydruki
- 2
- Wyświetlenia
- 1390
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
These are basic mounting plates, a 5x5 plate is provided for the ubiquitous enclosures with a 5mm by 5mm grid, the plate can be mount to these plates with M3 screws. “KBOX Labs carlon v6 plate” is provided for use with the KBOX Labs Carlon Meshtastic Mounting Solution baseplate for mounting in the 4x4x2 Carlon boxes widely available in USA and Canda hardware stores. Meshtastic ABM Rugged Node Carrier is provided for deuteranomalous1's Meshtastic ABM Rugged RAK 4631/19007 to replace the node carrier part with one for the RAK 1 watt kit.
Two step files are provided to integrate in to your own models, one that mounts the board at 4mm and a lower profile 2mm version. These should be not be printed on their own.
To hold the LORA IPEX connector on, the bolted version of RAK13302 I-PEX connector clamp can be attached with 2 M2.5x10 screws
Version 2 update added a support under the 4th screw hole on the 19007 board, while a screw cannot be used here extra support for the board is provided.