Housing for 3-Pin Magnetic Pogo Connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A user friendly housing for the 3-pin magnetic, spring loaded Pogo. Better grip and protection. Prints fast.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 98
- Wydruki
- 0
- Wyświetlenia
- 440
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a small, robust housing designed for 3-pin magnetic pogo-style connectors, with ears. It keeps the connector firmly aligned and protected while allowing easy mounting and repeatable connections. I use it to quickly (dis)connect RGB led strips mounted on mobile furniture.
Connector with ears, 2 Amps rated: https://www.aliexpress.com/item/1005005697060673.html
Wire: 3-Pin x 0.75 mm / 18AWG: https://www.aliexpress.com/item/32275215620.html
Hardware: 2 x M3 countersunk screw 6 mm total length (Philips head) and 2 x M3 nut
Tolerances are tight, so make sure your filament profile is calibrated. Recommended: 0.10 or 0.20 mm layer height / 3 or 4 walls / 40% gyroid infill / no supports.
