1 / 5
Housing for 3-Pin Magnetic Pogo Connector — image 1
1 / 5

Housing for 3-Pin Magnetic Pogo Connector

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A user friendly housing for the 3-pin magnetic, spring loaded Pogo. Better grip and protection. Prints fast.

Rating
0 / 5
Likes
13
Downloads
98
Makes
0
Views
440
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a small, robust housing designed for 3-pin magnetic pogo-style connectors, with ears. It keeps the connector firmly aligned and protected while allowing easy mounting and repeatable connections. I use it to quickly (dis)connect RGB led strips mounted on mobile furniture.

Connector with ears, 2 Amps rated: https://www.aliexpress.com/item/1005005697060673.html
Wire: 3-Pin x 0.75 mm / 18AWG: https://www.aliexpress.com/item/32275215620.html
Hardware: 2 x M3 countersunk screw 6 mm total length (Philips head) and 2 x M3 nut

Tolerances are tight, so make sure your filament profile is calibrated. Recommended: 0.10 or 0.20 mm layer height / 3 or 4 walls / 40% gyroid infill / no supports.

Tags